10-30-2012 05:52 AM
I had posted this yesterday in switching. I feel this belongs to routing and hence posting the same here:
I have a 2610-24 L2+ switch in which I have configured 3 Vlans
Default-Vlan : Vlan 1 - IP add 192.168.0.80/24 which has port no 1 and 4-6 as untagged
VLAN 2 : Test VLAN - IP add 192.168.20.1/24 which has port number 2 and 7-9 as untagged
VLAN 3 : Demo VLAN - IP add 192.168.30.1/24 which has port no 3 and 10-13 as untagged
I have also executed IP Routing command.
Now following PCs are connected:
PC1 : 192.168.0.81/24 Gateway :192.168.0.80 connected to eth 1
PC2 : 192.168.20.10/24 Gateway 192.168.20.1 connected to eth 2
PC3 : 192.168.30.10/24 Gateway 192.168.30.1 connected to eth 3
All PCs are able to ping their own gateway IP (and any PC in the same network connected to their VLAN Group ports). They are also able to ping the other VLAN gateway IPs. But that is about it. They are not able to ping or access other VLAN PCs.
Ex: PC1 pings 192.168.0.80 and 192.168.20.1 & 192.168.30.1. But not PC2 or PC3.
Can some one suggest where I have to correct the configuration please?
Thanks in advance.
10-30-2012 06:05 PM
My first guess is that your PCs are not using the switch as their default gateway. But to confirm, a copy of your switch config ('show run') and your routing table ('show ip route') would be good.
09-20-2013 01:38 AM
Thanks for the support.