E5406zl Layer3 Problem.. Help (289 Views)
Reply
Occasional Contributor
Posts: 4
Registered: ‎01-23-2014
Message 1 of 3 (289 Views)

E5406zl Layer3 Problem.. Help

Hello,

 

My switch E5406zl running act as Layer2 switch.

Now I want to change it as a core switch, where it act as gateway for LAN.

 

Port A8 set as uplink with IP Address 10.1.1.2/30

ip route 0.0.0.0 0.0.0.0 10.1.1.1

ip dns server-address priority 1 10.20.40.20
ip dns server-address priority 2 10.20.40.40

 

I create VLAN10 with IP Address 10.10.10.1/24, port A7 mode untagged.

 

And PC with IP 10.10.10.2/24

 

From switch, I can ping to gateway 10.1.1.1, the same when I ping to host like yahoo.com or other.

 

But there is problem when I test from PC direct to port A7:

It can ping to 10.10.10.1. But can't ping to 10.1.1.2.

certainly, it can't connect to the Internet.

 

Please help me, what causing it?

 

Thanks,

Ranto

 

 

Esteemed Contributor
Posts: 296
Registered: ‎07-24-2000
Message 2 of 3 (255 Views)

Re: E5406zl Layer3 Problem.. Help

Howdy,
PC itself needs a default gateway set (10.10.10.1should do it)
Rest of the world needs to know that to get to the 10.10.10.0/24 network that they need to go via 10.1.1.1
Ta
Ian
What's yellow and dangerous - shark infested custard
Occasional Contributor
Posts: 4
Registered: ‎01-23-2014
Message 3 of 3 (114 Views)

Re: E5406zl Layer3 Problem.. Help

Lately reply.


Ian Vaughan wrote:
Howdy,
PC itself needs a default gateway set (10.10.10.1should do it)
Rest of the world needs to know that to get to the 10.10.10.0/24 network that they need to go via 10.1.1.1
Ta
Ian



This is very embarassing for me... 

It's just enable mode routing.. :LOL

 

#ip routing

 

Thank you.

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.