ACL in HP Procurve 2824 (531 Views)
Reply
Occasional Visitor
AnandaNarayana
Posts: 2
Registered: ‎01-29-2013
Message 1 of 4 (531 Views)

ACL in HP Procurve 2824

Hi,

 I have HP Procurve 2824 switch which i am using it as a core switch by creating multiple vlans. My requirement is to create a ACL for restricting access from one vlan to other but unfortunately i don't see the "ip access-list" command. Any help or a work around in this regard is much apppreciated.

 

The version i have is "I.08.58" and "i.10.101"

Occasional Visitor
AnandaNarayana
Posts: 2
Registered: ‎01-29-2013
Message 2 of 4 (511 Views)

Re: ACL in HP Procurve 2824

Hi,

  Just checking if we have the ACL option in HP 2824? I saw my 2610 has wondering why  2824 which is a higer version of this series does not have. :-(

Honored Contributor
Peter_Debruyne
Posts: 326
Registered: ‎03-21-2011
Message 3 of 4 (507 Views)

Re: ACL in HP Procurve 2824

Hi,

 

For procurve/e-series, the 26xx/29xx/28xx series have support for L3 lite (routing : yes, doing some usefull routing : no).

The main goal of the L3 lite on these switches is to support L3 features like dscp (IP qos), dhcp snooping, arp protection etc, but not really to be the core router of the network.

 

You need the 35xx/38xx/54xx series for some normal routing functions (like decent acls, some vrrp, ospf etc).

 

Best regards,Peter

 

Occasional Visitor
babs77
Posts: 1
Registered: ‎09-27-2013
Message 4 of 4 (408 Views)

Re: ACL in HP Procurve 2824

configuration the ACL in HP Procurve 2824

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.