inf file txtsetup.sif is corrupt or missing status 4 (3035 Views)
Reply
Occasional Visitor
Elbe Krause
Posts: 2
Registered: ‎10-28-2009
Message 1 of 5 (3,035 Views)

inf file txtsetup.sif is corrupt or missing status 4

Good day to you,

I am installing Windows 2003 64-bit on an Integrity rx2660. No software has been installed yet. After the Smart Setup CD reads perfectly, and I am asked to insert the Windows CD, the above message appears.
Please assist as a matter of urgency.

I have tried to find a solution multiple times, on different internet sites, to no avail.

Thanking you in anticipation,
Elbe Krause

I thank you for your
Please use plain text.
Honored Contributor
kris rombauts
Posts: 1,175
Registered: ‎03-26-2002
Message 2 of 5 (3,035 Views)

Re: inf file txtsetup.sif is corrupt or missing status 4

Hi Elbe,

make sure you have a Microsoft W2K3 install CD with SP1 or SP2 slipstreamed. The integrity servers with IDE/USB based CDROM/DVDROM like the rx2660 are not supported with W2K3 versions before W2K3 SP1.

If that has been verified, try another media (another copy of the install cd ?)

HTH

Kris
Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,946
Registered: ‎03-06-2006
Message 3 of 5 (3,035 Views)

Re: inf file txtsetup.sif is corrupt or missing status 4

You may want to ask in the ITRC forum about Integrity Servers:
http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=275
Please use plain text.
Occasional Visitor
Elbe Krause
Posts: 2
Registered: ‎10-28-2009
Message 4 of 5 (3,035 Views)

Re: inf file txtsetup.sif is corrupt or missing status 4

I thank you for your prompt reply and willing assistance. It turned out that the Integrity rx2660 that I was working on, could not support a Windows installation, because the PCI-X Smart Array P600 Serial Attached SCSI SAS)Controller - Part number 337972-B21, was missing. I am waiting for this controller to be delivered to me, and hopefully after that has been installed, all should be well.

Regards,
Elbe Krause
Please use plain text.
Occasional Visitor
dianac10
Posts: 1
Registered: ‎06-24-2010
Message 5 of 5 (2,939 Views)

Re: inf file txtsetup.sif is corrupt or missing status 4

Hi,

 

Did the PCI-X Smart Array P600 Serial Attached SCSI SAS)Controller - Part number 337972-B21 fixed your issue? We are facing the same problem and tried installing windows server 2003 sp1 and sp2.

 

Thanks

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation