Re: HP Integrity RX1620 - Fatal BMC Error (2429 Views)
Occasional Visitor
Posts: 1
Registered: ‎08-11-2010
Message 1 of 3 (2,796 Views)

HP Integrity RX1620 - Fatal BMC Error

A few weeks ago, after a reboot for replacing HDs, our server for testing did not restart again. The errors:


This boot experienced the following problems:

WARNING[10]: BMC System Event Log is full

ERROR[19]: Failure writing BMC token on download

WARNING[22]: BMC token read fail on upload/init new BMC token on upload

WARNING[52]: A ROM revision is inconsistent with FIT or REVBLOCK


The boot will halt at the Boot Manager

Do not attempt to boot an O/S before fixing the error(s)


We try to clean the BMC log, using the console, but we couldn't.  We are thinking that the problem is the BMC card, because when we retired it, the same errors appeared.


Thank you for your help

Honored Contributor
Posts: 1,251
Registered: ‎06-26-2001
Message 2 of 3 (2,742 Views)

Re: HP Integrity RX1620 - Fatal BMC Error

You could try removing the AC power cords from the system and trying again.  This will fully reset the BMC circuitry.  You may also find more information in the MP Event Logs.




HP Pro
Posts: 342
Registered: ‎10-11-2008
Message 3 of 3 (2,429 Views)

Re: HP Integrity RX1620 - Fatal BMC Error

 Hi ,


The Error Message Seems to be an   Firmware  Issue.


Updating Firmware to the  latest  may resolve the issue.


Note : Please check MP logs also




I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

If you feel this was helpful please click the KUDOS! thumb below!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.