Re: how to change password for integrated lights-out 2 (426 Views)
Reply
Occasional Visitor
helpcodemonkey
Posts: 2
Registered: ‎10-31-2013
Message 1 of 4 (461 Views)
Accepted Solution

how to change password for integrated lights-out 2

hi im currently using integrated lights out 2 on a hp integrity rx 2660. the status summary of the iLo is as follows:

iLOMP: f.02.25

system firmware: rom a 04. 11, rom b 04.11, boot rom a

 

currently im using this command to power on /off and restart this machine:

ipmitool -H host -P mypasswordpower cycle.

 

i would like to change the password "mypassword" . how can i do so? 

Please use plain text.
HP Pro
Holger G
Posts: 51
Registered: ‎11-16-2010
Message 2 of 4 (445 Views)

Re: how to change password for integrated lights-out 2

Hi,

please check the IPMItool website at http://ipmitool.sourceforge.net/index.html for command usage details.


Example of how to change lan IPMI password to mynewpassword:
ipmitool -I lan -H host -P mypassword lan set 1 password "mynewpassword"

 

 

Kind Regards

Holger

Was this post useful? - You may click the KUDOS! Star.

 

Note: One or more of the links above will take you outside the Hewlett-Packard Web site, HP does not control and is not responsible for information outside of the HP Web site.

Please use plain text.
Occasional Visitor
helpcodemonkey
Posts: 2
Registered: ‎10-31-2013
Message 3 of 4 (426 Views)

Re: how to change password for integrated lights-out 2

tks Holger. this works like a charm
Please use plain text.
顾问
lukai
Posts: 13
Registered: ‎12-17-2013
Message 4 of 4 (147 Views)

Re: how to change password for integrated lights-out 2

thanks

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation