Re: change the ILO IP on rx2660. (1220 Views)
Reply
Regular Advisor
Posts: 195
Registered: ‎04-10-2010
Message 1 of 3 (1,247 Views)

change the ILO IP on rx2660.

Hi,

 

i have rx2660 servers run HP-UX 11.31 operating system, How can i change the ILO IP address

of this server remotely and locally ? where i can login to current IP address remotely.

 

Thanks

Acclaimed Contributor
Posts: 23,920
Registered: ‎10-02-2001
Message 2 of 3 (1,242 Views)

Re: change the ILO IP on rx2660.

Try from SMH:

http://server-ip:2301

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
HP Pro
Posts: 342
Registered: ‎10-11-2008
Message 3 of 3 (1,220 Views)

Re: change the ILO IP on rx2660.

[ Edited ]

Hi,

 

You can also try LC command in MP iLO.

 

1) Login to the MP ( Telnet to the existing MP IP Address)

Username and Password would be Admin/Admin

2) Go to MP Main Menu then Command Menu by typing CM

You will be placed in MP:CM

3) The Type LC , you will see the existing configuration

MP:CM>LC

4) You can change the configuration as per yor requirement.

 

 

HTH

Surendar

How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

 

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details



-------------------------------------------------------------------------
If you feel this was helpful please click the KUDOS! thumb below!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.