Re: change the ILO IP on rx2660. (790 Views)
Reply
Regular Advisor
itrc55
Posts: 195
Registered: ‎04-10-2010
Message 1 of 3 (795 Views)

change the ILO IP on rx2660.

Hi,

 

i have rx2660 servers run HP-UX 11.31 operating system, How can i change the ILO IP address

of this server remotely and locally ? where i can login to current IP address remotely.

 

Thanks

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,104
Registered: ‎10-02-2001
Message 2 of 3 (790 Views)

Re: change the ILO IP on rx2660.

Try from SMH:

http://server-ip:2301

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
HP Pro
S_Logan
Posts: 310
Registered: ‎10-11-2008
Message 3 of 3 (768 Views)

Re: change the ILO IP on rx2660.

[ Edited ]

Hi,

 

You can also try LC command in MP iLO.

 

1) Login to the MP ( Telnet to the existing MP IP Address)

Username and Password would be Admin/Admin

2) Go to MP Main Menu then Command Menu by typing CM

You will be placed in MP:CM

3) The Type LC , you will see the existing configuration

MP:CM>LC

4) You can change the configuration as per yor requirement.

 

 

HTH

Surendar

How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

 

 

I work for HP
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation