Re: RX2800 console through MP and VGA (490 Views)
Reply
Occasional Contributor
Posts: 3
Registered: ‎11-26-2013
Message 1 of 4 (554 Views)

RX2800 console through MP and VGA

RX2800 i2 with OpenVMS

 

From my understanding, the console can be either the MP or VGA, but not both.  Is this understanding correct?

 

My concern is this:

 

After changing the primary console to the MP, VGA console output stops when the OS is booted.  So during boot, until the vms login window appears, it just sits there like it is frozen.

Acclaimed Contributor
Posts: 23,611
Registered: ‎10-02-2001
Message 2 of 4 (551 Views)

Re: RX2800 console through MP and VGA

It is correct, AFAIK.

But with the MP as console you can watch the boot process from ILO/MP and it is recorded in the console log.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor
Posts: 3
Registered: ‎11-26-2013
Message 3 of 4 (532 Views)

Re: RX2800 console through MP and VGA

Thank you!  I just wanted to make sure.

HP Pro
Posts: 316
Registered: ‎10-11-2008
Message 4 of 4 (490 Views)

Re: RX2800 console through MP and VGA

Hi ,

 

Using the collowing command you can specify which output should be your primary "EFI Shell> conconfig"

Regards,
S_logan

I work for HP
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.