Re: How many and what are the model numbers of all lan cards in a rx8640 (169 Views)
Reply
Honored Contributor
Posts: 7,167
Registered: ‎06-04-2001
Message 1 of 2 (184 Views)

How many and what are the model numbers of all lan cards in a rx8640

Can you tell, from either the MP (tried but didn't see a way) or from a vpar how many lan cards are installed across the whole chasis and what models they are?

 

I checked out the parstatus and vparstatus and olrad and nwmgr commands but couldn't figure this out.

 

Thanks.

Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Acclaimed Contributor
Posts: 23,829
Registered: ‎10-02-2001
Message 2 of 2 (169 Views)

Re: How many and what are the model numbers of all lan cards in a rx8640

Hi Geoff,

 

IMHO you cannot. The MP is not aware what is in the slots, the running OS has only access to the assigned resources. So you need to collect an ioscan from all vPars and check with vparstatus if there are unassigned slots. You will only have access to unassigned slots if you are in nPar mode.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.