HPUX system is in EFI shell prompt after system rebooted (544 Views)
Reply
Regular Advisor
Posts: 156
Registered: ‎03-23-2009
Message 1 of 4 (544 Views)

HPUX system is in EFI shell prompt after system rebooted

Hi,

Can anyone help regarding the following issues:

One of my HP-UX 11iv3 system is in EFI shell prompt ( shell>) each time system is rebooted it fail to nomally boot and try to boot from the network and after failed it will go to >shell prompt. Then I need manually choose "boot ftom file" for UP the system. For additional information this is an BL870c blade server.

Aungshu
Acclaimed Contributor
Posts: 23,781
Registered: ‎10-02-2001
Message 2 of 4 (544 Views)

Re: HPUX system is in EFI shell prompt after system rebooted

Boot up hp-ux and use "setboot" to adjust the boot entries and automatic boot.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Regular Advisor
Posts: 156
Registered: ‎03-23-2009
Message 3 of 4 (544 Views)

Re: HPUX system is in EFI shell prompt after system rebooted

Thanks for your help. I will acknowledge again when I go to the customer site and sove the issues.


Aunsghu
Trusted Contributor
Posts: 570
Registered: ‎09-12-2002
Message 4 of 4 (544 Views)

Re: HPUX system is in EFI shell prompt after system rebooted

Dear Pual.

type setboot
this will show you your current settings. PRI, HAA, and ALT

Primary bootpath : 0/1/1/0.0.0
HA Alternate bootpath : 0/1/1/0.1.0
Alternate bootpath : 0/1/2/1

Autoboot is ON (enabled)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.