EFI Shell (1029 Views)
Reply
Frequent Advisor
Jonathan Grymes
Posts: 80
Registered: ‎09-23-2004
Message 1 of 5 (1,029 Views)

EFI Shell

[ Edited ]

Booting server to get EFI Shell. To determine sasflash version and display information about about 1068 and 1068E cards on the system. Every command I type returns invalid parameter.

System is HP-UX 11.23 (rx2660)

 

At the Shell prompt:

 

shell>sasflash

Invalid parameter

shell>sasflash -listall

Invalid parameter

 

 

P.S. this thread has been moved From HP-UX > System Administration to Servers > Integrity. - Hp Forum moderator

Acclaimed Contributor
Torsten.
Posts: 23,451
Registered: ‎10-02-2001
Message 2 of 5 (996 Views)

Re: EFI Shell

[ Edited ]

These commands are not built-in.

Use sasmgr from hp-ux, example:

$ sasmgr get_info -D /dev/sasd0
Driver Name : sasd
Bundle Version : B.11.31.01
Product Number : 399490-001
Hardware Path : 0/4/1/0
Health of HBA : ONLINE
PCI Vendor ID : 0x1000
PCI Device ID : 0x0054
PCI Subsystem Vendor ID : 0x3228
PCI Subsystem ID : 0x103c
PCI Revision ID : 0x0000
Max. PHYs supported : 8
Max. IO size : 1048576

*********************************************************************
***** HBA Specific information *****
*********************************************************************
HBA state : READY
Driver firmware dump available : NO
Driver firmware dump timestamp : N/A
Firmware Revision : 1.16.0.0


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HP Pro
Jason_L
Posts: 52
Registered: ‎07-01-2003
Message 3 of 5 (941 Views)

Re: EFI Shell

Sasflash is a utility that comes with the sas fw download. So it is not native to the efi shell. You can download (on mobile no link) put on a usb to execute at the efi.

You will have to change to the partition of usb disk. Usually it is fs0:
I work for HP.
HP Pro
S_Logan
Posts: 312
Registered: ‎10-11-2008
Message 4 of 5 (911 Views)

Re: EFI Shell

Hi ,

 

Please check this URL fro more infromation on SASflash  and firmware driver:

 

 SAS HBA EFI driver/firmware

 

sasflash.efi  -   EFI  utility to update  EFI  driver  and HBA firmware on Serial Attached  SCSI  adaptor  based  on  LSI  1068

 

 

Regards,

S_Logan

I work for HP
顾问
lukai
Posts: 13
Registered: ‎12-17-2013
Message 5 of 5 (676 Views)

Re: EFI Shell

thansk for share~

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.