MPE - Instalation (204 Views)
Reply
Super Advisor
Piotr Kirklewski
Posts: 339
Registered: ‎01-12-2007
Message 1 of 4 (204 Views)
Accepted Solution

MPE - Instalation

Hi there
I have an HP -3000 server, the disk has been wiped and I'm not familiar with installation of MPE.

Where to get an installation files, how to start etc.

Bets regards
Jesus is the King
Please use plain text.
Esteemed Contributor
Dan Clifford
Posts: 201
Registered: ‎03-25-1998
Message 2 of 4 (204 Views)

Re: MPE - Instalation

Piotr,

If you have HP support, now would probably be an excellent time to open a call with them.

Do you have any tapes - a full backup or a tape labelled SLT perhaps?

How long ago was the system up and running?

Dan
Please use plain text.
Super Advisor
Piotr Kirklewski
Posts: 339
Registered: ‎01-12-2007
Message 3 of 4 (204 Views)

Re: MPE - Instalation

I'm using this system only for training purposes.
I have a tape labeled as iX 6.0.
But have no idea how to start.

Jesus is the King
Please use plain text.
Honored Contributor
Kwan Fong, Emile
Posts: 1,162
Registered: ‎07-10-2000
Message 4 of 4 (204 Views)

Re: MPE - Instalation

Hello Piotr,

It looks like you'll have to start from scratch.

I recommend you follow Chapter #2 "Checklist K - Install a new system" of the "HP 3000 MPE/iX Release 6.0 System Software Maintenance Manual (Release C.60.00)" available right here : http://docs.hp.com/en/30216-90272/index.html

You may choose to use "Checklist J - Reinstall using a CSLT" should you have a current IO configuration & CSLT tapes.

Hope this helps. Good Luck.
King is the customer!
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation