pax: write : I/O error (1212 Views)
Reply
Occasional Visitor
Greigster
Posts: 1
Registered: ‎07-19-2011
Message 1 of 4 (1,212 Views)

pax: write : I/O error

Hello

while trying to make a recovery tape I get the following error on my rp3440 hp-ux 11.v1 box with LTO4 tapedrive:

 

njord 116: make_tape_recovery -a /dev/rmt/lto4 -l -v -m tar -x inc_entire=vg00
       * Creating local directories for configuration files and archive.

=======  07/19/11 15:32:59 WETDST  Started make_tape_recovery. (Tue Jul 19
         15:32:59 WETDST 2011)
         @(#)Ignite-UX Revision C.7.6.100
         @(#)ignite/net_recovery (opt) Revision:
         /branches/IUX_RA0806/ignite/src@73644 Last Modified: 2008-04-15
         17:21:10 -0600 (Tue, 15 Apr 2008)

       * Testing for necessary pax patch.
       * Checking Versions of Ignite-UX filesets
       * Scanning system for IO devices...
       * Boot device is: 0/1/1/0.0.0
       * Creating System Configuration.
       * /opt/ignite/bin/save_config -f
         /var/opt/ignite/recovery/2011-07-19,15:32/system_cfg vg00
save_config: warning - /dev/vg00/lvol4 has an umounted HFS filesystem on it. Therefore, any file system content in /dev/vg00/lvol4 will not be backed up.
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Backing Up Volume Group /dev/vg03
       * /usr/sbin/vgcfgbackup /dev/vg03
       * Creating Map Files for Volume Group /dev/vg03
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg03.mapfile /dev/vg03

       * Backing Up Volume Group /dev/vg04
       * /usr/sbin/vgcfgbackup /dev/vg04
       * Creating Map Files for Volume Group /dev/vg04
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg04.mapfile /dev/vg04

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration

       * /opt/ignite/lbin/make_arch_config -c
         /var/opt/ignite/recovery/2011-07-19,15:32/archive_cfg -g
         /var/opt/ignite/recovery/2011-07-19,15:32/flist -n 2011-07-19,15:32 -r
         pa -b 64 -d Recovery\ Archive -t 1 -i 1 -m t
       * Saving the information about archive to
         /var/opt/ignite/recovery/previews
       * Creating The Tape Archive
       * /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/lto4 -t n -s
         local -n 2011-07-19,15:32 -m t -w
         /var/opt/ignite/recovery/2011-07-19,15:32/recovery.log -u -R -g
         /var/opt/ignite/recovery/2011-07-19,15:32/flist -a 4132980
        
       * Preparing to create a system archive.

       * Archiving contents of njord via tar image to local device /dev/rmt/lto4.
pax: write : I/O error
pax: A write error has occurred.
WARNING: The pax command returned a non-zero exit status (exit status 1).
ERROR:   The find_files command failed (exit status 141).

ERROR:   The make_sys_image command failed. The system recovery archive will
         not be created.

=======  07/19/11 15:34:12 WETDST  make_tape_recovery completed unsuccessfully
njord 117: 

 

Originally I tried to /dev/rmt/0mn but with the same result, lto4 is just a node


 

Testing my tapedrive :

     tar cvf /dev/rmt/lto4  /multidata/ForTest

works fine.

 

njord 94: swlist -l product|grep -i ignite
  Ignite-UX             C.7.6.100      HP-UX System Installation Services

 

njord 95: swlist -l product | grep -i pax
  PHCO_35998            1.0            pax(1) cumulative patch

 

I thought maybe the 'pax' should be updated but I can only find depot's for 11.23 and 11.v3..

any tips?

 

originally I tried to /dev/rmt/0mn but with the same result, lto4 is just a node

 

Please use plain text.
Exalted Contributor
Steven E. Protter
Posts: 33,806
Registered: ‎08-15-2002
Message 2 of 4 (1,207 Views)

Re: pax: write : I/O error

Shalom,

 

There is a wrapper called pax_iux that could be involed with this problem.

 

First some questions:

 

Is this system unique, or is the problem something that can be duplicated on other systems?

 

What is the reason you are using -m tar directive? Legacy, because it was used before or some specific purpose.

 

SEP

Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Please use plain text.
Outstanding Contributor
Pete Randall
Posts: 16,205
Registered: ‎11-03-1996
Message 3 of 4 (1,199 Views)

Re: pax: write : I/O error

Seems pretty straightforward to me - I/O error = bad tape or dirty drive.


Pete
Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,853
Registered: ‎03-06-2006
Message 4 of 4 (1,193 Views)

Re: pax: write : I/O error

>Testing my tape drive:  tar cvf /dev/rmt/lto4  /multidata/ForTest

 

You need to write to your tape.



Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation