08-25-2011 10:37 AM
HP-UX 11.23 & Ignite-UX C.7.6.98
make_tape_recovery failed with following error.
Please tell me correct command to be successfully completion.
command is "make_tape_recovery -r -v -a /dev/rmt/0mn"
ERROR: Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16).
ERROR: The rewind command failed.
No one access the tape drive except this ignite operation.
08-26-2011 03:44 AM - edited 08-26-2011 02:03 PM
What does "ll /dev/rmt/0mn" show?
Any evidence it wrote anything or was the rewind the first thing it tried to do?
08-26-2011 06:39 PM
Thank you for your advice.
This make_tape_recovery is online backup,
I tried after stopping Netbackup using /sbin/init.d/netbackup stop
and remove crontab job(crontab -r), then, I got message.
"======= 08/15/11 18:14:58 JST make_tape_recovery completed with warnings"
My guess this warning message from following pax warning,
* Archiving contents of pmrnbk91 via tar image to local device /dev/rmt/0mn.
WARNING: The pax command returned a non-zero exit status (exit status 1).
* Creation of system archive complete.
I understand ignite can not tar a large size file.
There is 23GB file on this server, but we don't need backup the file,
so I guess this make_tape_recovery ended successfully.
08-26-2011 07:05 PM
>I understand ignite can not tar a large size file.
>There is 23GB file on this server, but we don't need backup the file,
PAX-ENH should be able to handle any filesize. You need to install: