Re: make_tape_recovery failed with rewind error (843 Views)
Reply
Advisor
mura-kei7
Posts: 27
Registered: ‎07-03-2011
Message 1 of 6 (876 Views)

make_tape_recovery failed with rewind error

HP-UX 11.23 & Ignite-UX  C.7.6.98

make_tape_recovery failed with following error.

Please tell me correct command to be successfully completion.

command is "make_tape_recovery -r -v -a /dev/rmt/0mn"

 
ERROR:   Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16).
ERROR:   The rewind command failed.

 

No one access the tape drive except this ignite operation.

 

 

Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,896
Registered: ‎03-06-2006
Message 2 of 6 (863 Views)

Re: make_tape_recovery failed with rewind error

[ Edited ]

What does "ll /dev/rmt/0mn" show?

Any evidence it wrote anything or was the rewind the first thing it tried to do?

Please use plain text.
Honored Contributor
Robert_Jewell
Posts: 1,231
Registered: ‎06-26-2001
Message 3 of 6 (853 Views)

Re: make_tape_recovery failed with rewind error

Also, view the results of # ioscan -fnC tape

 

Is /dev/rmt/0xx CLAIMED?

 

-Bob

Please use plain text.
Advisor
mura-kei7
Posts: 27
Registered: ‎07-03-2011
Message 4 of 6 (843 Views)

Re: make_tape_recovery failed with rewind error

Thank you for your advice.

This make_tape_recovery is online backup,
I tried after stopping Netbackup using /sbin/init.d/netbackup stop
and remove crontab job(crontab -r), then, I got  message.
"=======  08/15/11 18:14:58 JST  make_tape_recovery completed with warnings"

My guess this warning message from following pax warning,
-------
       * Archiving contents of pmrnbk91 via tar image to local device /dev/rmt/0mn.
pax: var/opt/ignite/recovery/archives/pmrndb91/2011-07-18,15:36 : >= 8GB. Not Dumped.
WARNING: The pax command returned a non-zero exit status (exit status 1).
       * Creation of system archive complete.
-------
I understand ignite can not tar a large size file.
There is 23GB file on this server, but we don't need backup the file,

so I guess this make_tape_recovery ended successfully.

Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,896
Registered: ‎03-06-2006
Message 5 of 6 (840 Views)

Re: make_tape_recovery failed with rewind error

>pax: var/opt/ignite/recovery/archives/pmrndb91/2011-07-18,15:36 : >= 8GB. Not Dumped.
>I understand ignite can not tar a large size file.
>There is 23GB file on this server, but we don't need backup the file,

 

PAX-ENH should be able to handle any filesize.  You need to install:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=PAX-ENH

Please use plain text.
Advisor
mura-kei7
Posts: 27
Registered: ‎07-03-2011
Message 6 of 6 (814 Views)

Re: make_tape_recovery failed with rewind error

Thank you all and I'm sorry my late response.

Unfortunately we have no plan to apply this patch.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation