Re: MAKE TAPE RECOVERY (84 Views)
Reply
Occasional Contributor
Shattia
Posts: 6
Registered: ‎07-20-2011
Message 1 of 3 (113 Views)

MAKE TAPE RECOVERY

[ Edited ]

Good day

 

When i do make tape recovery, it shows "make tape recovery completed with warnings"

 

 

 the error  " /var/spool/mqueue/qfr62N2aV4012641"

                      /var/spool/mqueue/dfr62N2aV4012641

                      /var/spool/mqueue/dfr63021CVH0168852

 

Can anyone advice me on this issues.

 

Thanks

 

 

 

P.S. This thread has been moved from HP-UX > System Administration > to Ignite.-Hp Forum Moderator

 

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,123
Registered: ‎10-02-2001
Message 2 of 3 (107 Views)

Re: MAKE TAPE RECOVERY

Some temp files are not backuped up, this is not an issue.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Honored Contributor
Patrick Wallek
Posts: 13,714
Registered: ‎06-21-2000
Message 3 of 3 (84 Views)

Re: MAKE TAPE RECOVERY

It would be more helpful if you could post the entire output generated by make_tape_recovery.  

 

In general though, Torsten is correct.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation