Re: MAKE TAPE RECOVERY (190 Views)
Reply
Occasional Contributor
Shattia
Posts: 6
Registered: ‎07-20-2011
Message 1 of 3 (196 Views)

MAKE TAPE RECOVERY

[ Edited ]

Good day

 

When i do make tape recovery, it shows "make tape recovery completed with warnings"

 

 

 the error  " /var/spool/mqueue/qfr62N2aV4012641"

                      /var/spool/mqueue/dfr62N2aV4012641

                      /var/spool/mqueue/dfr63021CVH0168852

 

Can anyone advice me on this issues.

 

Thanks

 

 

 

P.S. This thread has been moved from HP-UX > System Administration > to Ignite.-Hp Forum Moderator

 

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 2 of 3 (190 Views)

Re: MAKE TAPE RECOVERY

Some temp files are not backuped up, this is not an issue.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor
Patrick Wallek
Posts: 13,787
Registered: ‎06-21-2000
Message 3 of 3 (167 Views)

Re: MAKE TAPE RECOVERY

It would be more helpful if you could post the entire output generated by make_tape_recovery.  

 

In general though, Torsten is correct.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.