HOw to install the make_tape_recovery in our HP 11 i V3 server (740 Views)
Reply
Occasional Advisor
paramanandam jala
Posts: 14
Registered: ‎05-25-2010
Message 1 of 5 (740 Views)
Accepted Solution

HOw to install the make_tape_recovery in our HP 11 i V3 server

 make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
#
# make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
# man make_tape_recovery
No manual entry for make_tape_recovery.

 

Pl. help us to  create the ignite backup.

 

regards,

Anand,

Microcare computers,

09849914779.

Honored Contributor
Patrick Wallek
Posts: 13,787
Registered: ‎06-21-2000
Message 2 of 5 (737 Views)

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Go here to download the software:

http://h71028.www7.hp.com/enterprise/w1/en/os/hpux11i-system-management-ignite-ux.html?jumpid=ex_r15...

 

Once you have downloaded it and copied it to your HP-UX server install it using the 'swinstall' command.

Occasional Advisor
paramanandam jala
Posts: 14
Registered: ‎05-25-2010
Message 3 of 5 (719 Views)

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Downloaded the software and installed , but make_tape_recovery    giving the following error .

 

# make_tape_recovery -A -v -a /dev/rmt/24mn
sh: make_tape_recovery:  not found.
#

 

Pl. Help us create the tape.

 

REGARDS,

ANAND

 

Acclaimed Contributor
Dennis Handly
Posts: 25,291
Registered: ‎03-06-2006
Message 4 of 5 (716 Views)

Re: How to install the make_tape_recovery in our HP 11.31 server

>Downloaded the software and installed but make_tape_recovery giving the following error .

>sh: make_tape_recovery:  not found.

 

Did you log back in so that your $PATH was updated after swinstall?

Respected Contributor
vishnu.khandare
Posts: 194
Registered: ‎09-12-2010
Message 5 of 5 (701 Views)

Re: How to install the make_tape_recovery in our HP 11.31 server

Hi,

 

Is ignite installed, check by,

#swlist | grep -i ignite

 

If found installed, run

#whereis make_tape_recovery

 

and take full path and run the cmd to take ignite.

 

 

Regards

Vishnu

You should deserve before U desire!!!!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.