05-06-2011 01:03 PM
* Reading Target System's Installed Product Database (IPD)
* Target IPD: S0065240
* Reading Source Depot(s)
* Source depot: 184.108.40.206:/var/opt/ignite/depots/Rel_B.11.31/co
ERROR: An error was encountered while attempting to access the catalog of the
Software Distributor location
swlist command failed.
do not have the required permissions to select this target.
Check permissions using the "swacl" command or see your system
administrator for assistance. Or, to manage applications
designed and packaged for nonprivileged mode, see the
"run_as_superuser" option in the "sd" man page.
- More information may be found in the daemon logfile
on this target (default location is
* Reading Source Depot(s) failed with 1 error.
======= 05/06/11 20:55:32 UTC END Software Install failed with 1 error.
ERROR: No software was installed (no installed product database was created).
ERROR: Software load had one or more errors.
======= 05/06/11 20:55:32 UTC The operating system software has not been
successfully loaded. The swm install(1M) application was not completed
or failed to load some key files. (exit status was = 1).
1: Change the install server and/or depot information.
2: Retry software load process (non-interactive mode).
3: Retry software load process (interactive mode).
4: Run a shell.
05-07-2011 02:12 AM
Source depot: 220.127.116.11:/var/opt/ignite/depots/Rel_B.11.31/co
If you do
swlist -l depot -s
does it list this depot you are trying to install from ?
Make sure you can do . swlist -s
07-26-2011 02:34 PM - edited 07-26-2011 02:38 PM
It must be the problem with hostname which is mentioned on /etc/hosts (or) DNS entry.
Check the IP with "netstat -in"
Check the /etc/hosts whether IP and the hostname are correct.
check with nslookup <hostname>
It should give the proper IP and hostname.
Its worked for me.
07-31-2011 01:10 AM
It looks like a permission issue, try changing permission of depot files with below command.
# chmod -R 755 /location_of_depot
If the depot is NFS shared, check whether read/write permissions are given or not....
Best of luck!
Was this post useful? - You may click the KUDOS! star to say thank you.
01-07-2013 11:48 PM - edited 01-07-2013 11:50 PM
As told by Patrick Wallek,
Try stopping and restarting the swagent daemon first.
This helps majority of the times to resolve many issues related to sw commands.