Re: Clone system using ignite (130 Views)
Reply
Occasional Visitor
Scott Heiner
Posts: 2
Registered: ‎05-26-1998
Message 1 of 5 (130 Views)
Accepted Solution

Clone system using ignite

We currently have a golden system with three volume groups vg00, vg01and vg02. When we create the OS archive with make_sys_image the mount points on vg01 and vg02 are created in the "/" dir when we use ignite to clone the system to the next server. Is there anyway to create a true clone of the entire system including all Volume groups not just vg00?
Occasional Advisor
Van Steirteghem Thierry
Posts: 6
Registered: ‎10-01-2000
Message 2 of 5 (130 Views)

Re: Clone system using ignite

Hi Scott,

The command make_sys_image of IgniteUX makes a complete image of your complete system. The definition of golden image is : "A Golden image is a compressed archive of an entire installed and configured system." You can conclude that all Volume Groups are taken.

TIP: use -u option to determine if you have enough space in your archive dir on your IUX server.

Regards
Thierry
I am a thinker
Trusted Contributor
Glenn S. Davidson
Posts: 221
Registered: ‎06-04-1997
Message 3 of 5 (130 Views)

Re: Clone system using ignite

Look in http://docs.hp.com to get the manual I found it invaluable for creating a bootable CD of a system to carry with me for remote sites. It also talks about ways to include additional VG's. It also covers post ignite scripts which could include creating additional VG's and LV's and applying TAR balls to the new filesystems. There is no way that I'm aware of to do what you're asking.
I've always just created a base OS flexible enough to cover all needs and then add applications on top. It seems like the easiest way to me.
Conformity Destroys a mans initiative and independence. It supresses his powerful inner drive to do his own thing.
Occasional Visitor
Scott Heiner
Posts: 2
Registered: ‎05-26-1998
Message 4 of 5 (130 Views)

Re: Clone system using ignite

Ignite does take all volume groups but restrores other volume groups to the "/" dir on vg00. It is not a true clone of the system.
Honored Contributor
Carlos Fernandez Riera
Posts: 1,172
Registered: ‎09-16-1998
Message 5 of 5 (130 Views)

Re: Clone system using ignite


Scott:

Ignite allows you full customized instalations, this is want you want.

You need read man 4 instl_adm ( ignite program lenguage).

See also /opt/ignite/data/B_11.00/config.

My sugestion is:

Apply your cd or tape to a server but break the automatic instalation.


Then select advanced options , and under disk tab create your own vgs and filesystems.

Complete the instalation.

The file /var/opt/ignite/local/config is the config file applied in your new system.

This config file must be included ussing intl_adm (1m) on your ditribution media.


You can create vg automaticaly but you must customize your instalation.

Hope this help.








unsupported
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.