Registering RFC1628 MIB (362 Views)
Reply
Occasional Contributor
Markus Roth
Posts: 7
Registered: ‎01-08-2006
Message 1 of 9 (362 Views)

Registering RFC1628 MIB

Hello,

I have some problems to register the UPS-MIB (rfc1628).

I used mcompile to create the cfg-file and receives no error message. But after I tried to register the cfg-file with mxmib I received the mesage: "IMPORTING CFG rfc1628.cfg
Error reading CFG: MIB node has no parent Line: 76.
AN ERROR OCCURRED EXECUTING THE COMMAND"

The line 76 shows: "upsMIB OBJECT IDENTIFIER ::= { mib-2 33 }"

Does anyone knows what I have to do to solve this problem and successfully register this mib?
I'm using HP SIM5.0

Thank you for your help
Markus
Valued Contributor
Maurice Skubski_1
Posts: 110
Registered: ‎06-25-2001
Message 2 of 9 (362 Views)

Re: Registering RFC1628 MIB

hm, is there a error in the mib. please check this: http://www.faqs.org/rfcs/rfc1628.html
ms
Occasional Contributor
Markus Roth
Posts: 7
Registered: ‎01-08-2006
Message 3 of 9 (362 Views)

Re: Registering RFC1628 MIB

My MIB is identical to this MIB
Occasional Visitor
Peter_351
Posts: 1
Registered: ‎08-04-2004
Message 4 of 9 (362 Views)

Re: Registering RFC1628 MIB

I just ran into this same problem yesterday installing MIBs for our Liebert UPS. I wound up having to contact them to get corrected files to use with SIM.
Frequent Advisor
Paul Kratz
Posts: 54
Registered: ‎12-04-2003
Message 5 of 9 (362 Views)

Re: Registering RFC1628 MIB

I have the some Problem.

Did you find a solution?
Did you call HP and open a call?
Occasional Contributor
Markus Roth
Posts: 7
Registered: ‎01-08-2006
Message 6 of 9 (362 Views)

Re: Registering RFC1628 MIB

Yes I've called HP Support.

They told me that I should call the vendor of the MIB !!

It is not a problem of HP SIM ??!!

I will open a online request to HP Support again.
Advisor
Markus Banfi_1
Posts: 20
Registered: ‎01-09-2001
Message 7 of 9 (362 Views)

Re: Registering RFC1628 MIB

Hi,

we have the same problem here.
Did you find any solution?


Best regards,
-Markus-

Analyse - Simplify - Automate
Occasional Contributor
Markus Roth
Posts: 7
Registered: ‎01-08-2006
Message 8 of 9 (362 Views)

Re: Registering RFC1628 MIB

The vondor of the mib sent me an special mib for HP SIM.

This was the solution of my problem.

HP Support gave me no feedback!
Advisor
Markus Banfi_1
Posts: 20
Registered: ‎01-09-2001
Message 9 of 9 (362 Views)

Re: Registering RFC1628 MIB

Hi,

Thanks for the info.
Meanwhile I figured it out. I had to insert a line into the .cfg file before the one SIM said is in error:

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }

After this importing (mxmib -a) worked.

-Markus-
Analyse - Simplify - Automate
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.