Re: HPSIM communication Issue (297 Views)
Reply
Frequent Advisor
Sands15
Posts: 45
Registered: ‎12-05-2013
Message 1 of 7 (315 Views)

HPSIM communication Issue

Hi,

 

I am getting issue with HP SIM.
I am not able to get data from a server.

SMH is working fine on the server
SIM server name has been added in SNMP settings

Please find the below logs:

********* Significant issues and overall target discovery/identification
          status:
Major:    The system cannot be identified properly for HP SIM to manage;
          unable to get one or more of the following: model, serial number or
          unique identifier (UUID). For management processors, verify the
          system is running the latest firmware. For Linux based operating
          systems, you must have dmidecode installed, enable the
          PermitRootLogin and PasswordAuthentication in sshd, and use root
          sign-in credential. For HP-UX, verify the sign-in credential. For
          Windows, check if WMIMapper is configured correctly on the CMS and
          verify the sign-in credential.
Normal:   Identification status is only available for servers, workstations,
          or desktops, where monitoring is enabled.

********* Additional results (listed for information only):

        * Starting identification process...
        * Checking for known running web servers...
        * Checking for SNMP protocol support on system...
Normal:   The system did not respond to SNMP. Verify security settings and
          community strings in Options->Security->Credentials->System
          Credentials
        * Running HP ProLiant management agent identification...
Normal:   The system does not support SNMP.
        * Running SNMP base cluster identification using common cluster
          MIB...
Normal:   SNMP is not supported or globally disabled, skipping SNMP cluster
          identification.
        * Checking for WBEM protocol support on system...
Minor:    This system does not have any SMI-S CIMOMs installed. No storage
          systems will be found on this system.
Minor:    The Central Management System (CMS) cannot communicate with the
          CIMOM locally installed on the managed system using the WBEM
          protocol, Identification will try to identify Windows systems using
          the WMI Mapper as proxy; for Linux and HP-UX systems, check
          credentials by going to Options->Security->Credentials->System
          Credentials. For Linux systems also check if the HP WBEM provider
          is installed.
        * Running WBEM rules based identification...
Minor:    Identification cannot get computer system hardware data from the
          WBEM / WMI providers.
        * Running Virtual Machine (VM) Host (non HP Integrity VM Host)
          Identification...
Normal:   The system is not a VM Host (non HP Integrity VM Host), or WBEM
          credentials may not be specified so skipping VM Identification.
        * Running Storage identification...
        * Did not detect the WBEM protocol support on this system. SMI
          storage identification will be skipped.
        * Storage identification completed.
        * Running HP NetServer identification...
Normal:   The system does not support SNMP.
        * Running HP-UX SNMP identification...
Normal:   The system does not support SNMP.
        * Running OA Identifier which will discover systems in an enclosure
          if the automatic enclosure discovery option for OA is enabled...
Normal:   The system is not an Onboard Administrator, skipping automatic
          discovery of systems in the enclosure.
        * Running XMLReply Identifier which will discover systems in a
          rack/enclosure if the automatic discovery option for the container
          node is enabled...
        * Running iLO Identifier which will discover the server if the
          automatic server discovery option for iLO is enabled...
Minor:    The system responds to the HTTP request but cannot get the XML
          output. It is normal for servers not to get the XML data.
        * Running p-Class Identifier...
Normal:   The system is not a p-Class so skipping p-Class identification.
        * Running IPMI protocol identification...
Normal:   IPMI protocol not detected so skipping IPMI Identification.
        * Running SSH Protocol identification...
Minor:    The system(s) do not have Secure Shell (SSH) installed or it is not
          running on the managed system(s).
        * Running SSH Identification...
Normal:   SSH Protocol is not enabled so skipping SSH Identification.
        * Running WS-Man identification...
Minor:    The system did not respond to WS-Management (WS-Man) request.
        * Running Monarch OA Identification...
Normal:   The system is not a monarch OA so skipping monarch OA
          identification.
        * Checking for System Management Homepage and other HP web agents...
Normal:   The system is not a server, storage or desktop. Skipping the check
          for System Management Homepage.
        * Running HP Serviceguard Identification...
        * Running SNMP System Type manager ...
Normal:   The system does not support SNMP.
        * Running SNMP subtypes identification...
        * Resolving DNS names...
Normal:   The fully qualified domain name was successfully resolved for the
          system.
        * Checking if the Node is a Virtual Center...
Normal:   Skipping MxVirtualCenter Identifier.
        * Running Virtual Machine Management (VMM) Plug-in Identification...
        * Building system relationships...
Minor:    System Management Homepage (SMH) is not installed or is not
          responding on the system(s).
        * Running system Manage Communication diagnosis...
        * System identification finished on system.


Kindly Help.

Esteemed Contributor
Esteemed Contributor
BPE
Posts: 348
Registered: ‎05-05-2010
Message 2 of 7 (299 Views)

Re: HPSIM communication Issue

Normal:   The system did not respond to SNMP. Verify security settings and
          community strings in Options->Security->Credentials->System
          Credentials
        * Running HP ProLiant management agent identification...

 

This looks like your community string is not set correct or your SIM Server name can not be resolved from your managed system .

Trusted Contributor
Andrew_Haak
Posts: 374
Registered: ‎09-13-2013
Message 3 of 7 (297 Views)

Re: HPSIM communication Issue

[ Edited ]
Hello there,

The above is correct, you could also check if the firewall is configured to allow snmp and if snmp it self is installed.

Type service snmpd status to check this.

Kind regards,

Andrew
Kind regards,

Andrew
Frequent Advisor
Sands15
Posts: 45
Registered: ‎12-05-2013
Message 4 of 7 (238 Views)

Re: HPSIM communication Issue

Kindly ellborate more about "service snaps statu"

Trusted Contributor
Andrew_Haak
Posts: 374
Registered: ‎09-13-2013
Message 5 of 7 (221 Views)

Re: HPSIM communication Issue

Hello there,

Sorry for the typo i ment service snmpd status

Kind regards,

Andrew
Kind regards,

Andrew
Acclaimed Contributor
Dennis Handly
Posts: 25,058
Registered: ‎03-06-2006
Message 6 of 7 (216 Views)

Re: HPSIM communication Issue

>Sorry for the typo i ment service snmpd status

 

You can edit your post with "Post Options > Edit Reply".

Trusted Contributor
Andrew_Haak
Posts: 374
Registered: ‎09-13-2013
Message 7 of 7 (209 Views)

Re: HPSIM communication Issue

Hello Dennis,

I normaly edit my typo's when i see them in time. This time overlooked my error, but thanks for the hint i corrected the original message.

Kind regards,

Andrew
Kind regards,

Andrew
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.