Re: While upgrading the Old-format-database (388 Views)
Reply
Advisor
rammohanreddy
Posts: 15
Registered: ‎12-06-2013
Message 1 of 4 (430 Views)

While upgrading the Old-format-database

Hi,

 

While upgrading the Old-format-database i got error "shown in below log"

 

4 End of verification
2013/12/10 07:20:34.547 2 4 A new license is activated
2013/12/10 07:20:34.968 2 4 Executing import scenario 'system'...
2013/12/10 07:20:34.968 3 4 Executing element 'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst'...
2013/12/10 07:20:34.968 4 4 Command '\"E:\\HP\\Asset Manager 9.40 en\\bin\\amimpl.exe\" -srclist:'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst' -dst:'HDSA_POCHDSA' -dstpass:$pwd$' will be executed.
2013/12/10 07:20:35.171 8 4 Asset Manager Import - Data import module\n(c) Copyright 1994-2013 Hewlett-Packard Development Company, L.P.\nVersion 9.40.10487 of 6/5/2013
2013/12/10 07:20:35.436 8 4 FIPS mode for the SSL library successfully enabled.
2013/12/10 07:20:39.663 8 1 (-2000) The user name or password is incorrect
2013/12/10 07:20:40.225 4 1 (2000) Error while executing command 'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst'

 

regards,

ram.

Please use plain text.
Honored Contributor
Mark Cullen_1
Posts: 1,213
Registered: ‎03-17-2010
Message 2 of 4 (404 Views)

Re: While upgrading the Old-format-database

Not sure what your question is however when performing the upgrade you should be using the Admin login account.  This data is prompted for during the upgrade wizard process so not sure why there is an error other than the incorrect values were supplied.

 

Since this failed on the system data import process you should be able to execute again via "execute import script" process of import module through client application.

Please use plain text.
HP Expert
Priya_B
Posts: 534
Registered: ‎10-25-2012
Message 3 of 4 (394 Views)

Re: While upgrading the Old-format-database

Yes looks like the username used for this is incorrect. Try the admin user as Mark suggested or a user with Administrative rights.

 

Please use the following document as a reference 

 

http://support.openview.hp.com/selfsolve/document/KM1012315

 

HP Support - If this post or any post helps you resolve an issue, please be sure to mark it as an acceptable solution.
Like a post, Please click Kudos to show appreciation !
Please use plain text.
Advisor
rammohanreddy
Posts: 15
Registered: ‎12-06-2013
Message 4 of 4 (388 Views)

Re: While upgrading the Old-format-database

after completing the upgradation only we are able to connect AM client.

 

I am getting the following error in the middle of upgradation from AM 5.22 to 9.4.

 

In application designer,select migration->update database

 

After completing the process,I got the following error.

 

 

4 End of verification
2013/12/10 07:20:34.547 2 4 A new license is activated
2013/12/10 07:20:34.968 2 4 Executing import scenario 'system'...
2013/12/10 07:20:34.968 3 4 Executing element 'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst'...
2013/12/10 07:20:34.968 4 4 Command '\"E:\\HP\\Asset Manager 9.40 en\\bin\\amimpl.exe\" -srclist:'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst' -dst:'HDSA_POCHDSA' -dstpass:$pwd$' will be executed.
2013/12/10 07:20:35.171 8 4 Asset Manager Import - Data import module\n(c) Copyright 1994-2013 Hewlett-Packard Development Company, L.P.\nVersion 9.40.10487 of 6/5/2013
2013/12/10 07:20:35.436 8 4 FIPS mode for the SSL library successfully enabled.
2013/12/10 07:20:39.663 8 1 (-2000) The user name or password is incorrect
2013/12/10 07:20:40.225 4 1 (2000) Error while executing command 'E:\\HP\\Asset Manager 9.40 en\\migration\\from522\\upgrade.lst'

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation