Re: Upgrading from IMC 5.2 to 7.0 (1556 Views)
Reply
Occasional Contributor
airport_guy
Posts: 10
Registered: ‎06-27-2013
Message 1 of 4 (1,629 Views)
Accepted Solution

Upgrading from IMC 5.2 to 7.0

Whenever we try to upgrade from IMC 5.2 to IMC 7.0, IMC reports that the data Analyzer Module is not compatible with IMC.  Do we ignore this or continue on?  The upgrade notes make no mention of this and from my understanding, the Data Analyzer is part of the base system.  We cannot remove it at all.

Honored Contributor
LindsayHill
Posts: 743
Registered: ‎11-16-2011
Message 2 of 4 (1,606 Views)

Re: Upgrading from IMC 5.2 to 7.0

Seems you need to undeploy "Data Analysis Manager" and "Data Analyzer". There's a dependency between them, which is why you couldn't remove just the Data Analyzer.

I don't know why this isn't handled automatically. It doesn't seem particularly obvious what the Data Analyzer actually does, nor does there seem to be any ill effect from removing it. Seems to be OK on the systems I've upgraded.

(Of course, take a backup before following advice you read on the Internet...)
CCIE 36708 | @northlandboy | lkhill.com
Occasional Contributor
airport_guy
Posts: 10
Registered: ‎06-27-2013
Message 3 of 4 (1,556 Views)

Re: Upgrading from IMC 5.2 to 7.0

Thanks!  That worked!

Advisor
larrymac
Posts: 35
Registered: ‎01-09-2013
Message 4 of 4 (1,411 Views)

Re: Upgrading from IMC 5.2 to 7.0

Hi

 

I also had to do this.

 

I have just opened a new post as a lot of my devices are now generating alarms.  I have posted a new query on this:

 

http://h30499.www3.hp.com/t5/IMC/IMC-Ver-7-Alarms/m-p/6298113#M1014

 

Would removing this component have any affect on SNMP?

 

Thanks

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.