Problem with iMC PLAT 5.2 (E0401) (298 Views)
Reply
Occasional Visitor
TommiH
Posts: 2
Registered: ‎11-22-2013
Message 1 of 3 (298 Views)

Problem with iMC PLAT 5.2 (E0401)

[ Edited ]

I have been taking backups of various models of HP switches with iMC configuration backup feature without a problem. But now I have a problem with hp 2530-48g series of switches. I get error message "Failed to telnet the device" I have configured telnet settings "Username + Password" and Username is manager. If I manually telnet to switch it works but not with backup feature.

 

 

P.S. This thread has been moved from Network Management / (OpenView-NNM) Support and News Forum to IMC. - Hp Forum Moderator

Please use plain text.
Honored Contributor
LindsayHill
Posts: 719
Registered: ‎11-16-2011
Message 2 of 3 (275 Views)

Re: Problem with iMC PLAT 5.2 (E0401)

The "Failed to telnet" message can be a bit of a generic error.

From a very quick look, I don't the sysOID for 2530 switches in conf\adapters\ICC\Hewlett Packard\adapter-index.xml. This means it might not be officially supported, but we can still get it working if that is the case.

Can you do these things:
* Logon to the IMC server itself (RDP/SSH), and telnet from there to the switch, just to make sure all is well.
* Find the sysOID of one of those switches - should be on the Device Details page. Post it here.
* What login type are you using (Telnet/SSH), and what file transfer mode? (TFTP/SFTP/FTP/SCP).
* Do you have SNMP read-write enabled on the switch, and/or configured in IMC? (nb you don't have to use read-write)

Try and run a backup of one of those switches, then get the latest entries from <IMC>\conf\log\imccfgbakdm*.log, and post it here (you may need to sanitise it first).
CCIE 36708 | @northlandboy | lkhill.com
Please use plain text.
Occasional Visitor
TommiH
Posts: 2
Registered: ‎11-22-2013
Message 3 of 3 (256 Views)

Re: Problem with iMC PLAT 5.2 (E0401)


Here is the sysOID for switch 1.3.6.1.4.1.11.2.3.7.11.139

snmp is both read/write enabled on switch

I have been using telnet to backup configuration.

Here is latest entries from log:

 

2013-11-25 10:12:34.988 [INFO (0)] [THREAD(4224)] [CProcurveConfigMgmt::backupConfig()] Begin. 2013-11-25 10:12:34.994 [INFO (6)] [THREAD(4224)] [CSnmpOper::iCommitOper] send snmp set packge fail.->[10.255.64.202] 2013-11-25 10:12:34.994 [ERROR (6)] [THREAD(4224)] [CProcurveConfigMgmt::setDevMibNodeValue()] Failed to call iCommitOper. 2013-11-25 10:12:34.994 [WARNING (-100)] [THREAD(4224)] [CProcurveConfigMgmt::initCmdEnv()] Failed to call setTftpMode() 2013-11-25 10:12:34.994 [INFO (0)] [THREAD(4224)] [CProcurveConfigMgmt::execCmdList()] Begin. 2013-11-25 10:12:44.122 [ERROR (-6)] [THREAD(4224)] [CTelnetService::connect] Error:

Invalid password

Username: 2013-11-25 10:12:44.122 [ERROR (-6)] [THREAD(4224)] [CTelnetExecutor::login()] Username or password wrong. 2013-11-25 10:12:44.130 [ERROR (19)] [THREAD(4224)] [CProcurveConfigMgmt::execCmdList()] Failed to login. 2013-11-25 10:12:44.135 [INFO (6)] [THREAD(4224)] [CSnmpOper::iCommitOper] send snmp set packge fail.->[10.255.64.202] 2013-11-25 10:12:44.135 [ERROR (6)] [THREAD(4224)] [CProcurveConfigMgmt::setDevMibNodeValue()] Failed to call iCommitOper. 2013-11-25 10:12:44.135 [INFO (19)] [THREAD(4224)] [CProcurveConfigMgmt::backupConfig()] End. 2013-11-25 10:12:45.147 [INFO (0)] [THREAD(4224)] [CProcurveConfigMgmt::backupConfig()] Begin. 2013-11-25 10:12:45.155 [INFO (6)] [THREAD(4224)] [CSnmpOper::iCommitOper] send snmp set packge fail.->[10.255.64.202] 2013-11-25 10:12:45.155 [ERROR (6)] [THREAD(4224)] [CProcurveConfigMgmt::setDevMibNodeValue()] Failed to call iCommitOper. 2013-11-25 10:12:45.155 [WARNING (-100)] [THREAD(4224)] [CProcurveConfigMgmt::initCmdEnv()] Failed to call setTftpMode() 2013-11-25 10:12:45.155 [INFO (0)] [THREAD(4224)] [CProcurveConfigMgmt::execCmdList()] Begin. 2013-11-25 10:12:54.102 [ERROR (-6)] [THREAD(4224)] [CTelnetService::connect] Error:

Invalid password

Username: 2013-11-25 10:12:54.102 [ERROR (-6)] [THREAD(4224)] [CTelnetExecutor::login()] Username or password wrong. 2013-11-25 10:12:54.109 [ERROR (19)] [THREAD(4224)] [CProcurveConfigMgmt::execCmdList()] Failed to login. 2013-11-25 10:12:54.114 [INFO (6)] [THREAD(4224)] [CSnmpOper::iCommitOper] send snmp set packge fail.->[10.255.64.202] 2013-11-25 10:12:54.114 [ERROR (6)] [THREAD(4224)] [CProcurveConfigMgmt::setDevMibNodeValue()] Failed to call iCommitOper. 2013-11-25 10:12:54.114 [INFO (19)] [THREAD(4224)] [CProcurveConfigMgmt::backupConfig()] End. 2013-11-25 10:12:55.114 [INFO (0)] [THREAD(4300)] Process backup transfer task completed, result: { -- SEQUENCE --  result { -- SEQUENCE --   operStep 'ff'H  -- ,   result '00'H  --

 } ,  devID '031b'H  -- ,  strSession ''H  -- "" --,  devDescr '4e756d6d696e656e30312831302e3235352e36342e32303229'H  -- "Numminen01(10.255.64.202)" --,  transferResultList { -- AsnDevFileTransferResultSeqOf SEQUENCE OF AsnTransferCfgFileResult   { -- SEQUENCE --    resultList { -- AsnCfgBakOprResultList SEQUENCE OF AsnCfgBakOprResult     { -- SEQUENCE --      operStep '00'H  -- ,      result '1779'H  --

    }    } ,    fileType '00'H  -- ,    cfgFileID '1eae'H  -- ,    hostFileName '72756e6e696e675f3936383736393635322e636667'H  -- "running_968769652.cfg" --,    devFileNamePath '31302e3235352e36342e3230325f72756e6e696e675f32303133313132353130313233342e636667'H  -- "10.255.64.202_running_20131125101234.cfg" --   }   { -- SEQUENCE --    resultList { -- AsnCfgBakOprResultList SEQUENCE OF AsnCfgBakOprResult     { -- SEQUENCE --      operStep '00'H  -- ,      result '1779'H  --

    }    } ,    fileType '01'H  -- ,    cfgFileID '1eaf'H  -- ,    hostFileName '737461727475705f3936383736393736322e636667'H  -- "startup_968769762.cfg" --,    devFileNamePath '31302e3235352e36342e3230325f737461727475705f32303133313132353130313234352e636667'H  -- "10.255.64.202_startup_20131125101245.cfg" --   }  }

}


LindsayHill wrote:
The "Failed to telnet" message can be a bit of a generic error.

From a very quick look, I don't the sysOID for 2530 switches in conf\adapters\ICC\Hewlett Packard\adapter-index.xml. This means it might not be officially supported, but we can still get it working if that is the case.

Can you do these things:
* Logon to the IMC server itself (RDP/SSH), and telnet from there to the switch, just to make sure all is well.
* Find the sysOID of one of those switches - should be on the Device Details page. Post it here.
* What login type are you using (Telnet/SSH), and what file transfer mode? (TFTP/SFTP/FTP/SCP).
* Do you have SNMP read-write enabled on the switch, and/or configured in IMC? (nb you don't have to use read-write)

Try and run a backup of one of those switches, then get the latest entries from <IMC>\conf\log\imccfgbakdm*.log, and post it here (you may need to sanitise it first).

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation