Re: IMC 5.1 in Topology View had wrong connection (969 Views)
Reply
Occasional Contributor
Posts: 9
Registered: ‎11-01-2011
Message 1 of 3 (1,040 Views)

IMC 5.1 in Topology View had wrong connection

I use IMC 5.1 with A-Series switch. S5500 and V1910

 

after I add all switch and see in Topology view

 

their had wrong connection between each switch but in real physical no had this connection

 

I try to delete device and add it again but it still wrong

 

sample

 

Physical connection:  MainSwitch --> V1910 Fl1

                                                             --> V1910 Fl2

 

In Topology View: It add link connection Between V1910 Fl1 and V1910 Fl2 directly.

Highlighted
Occasional Contributor
Posts: 9
Registered: ‎11-01-2011
Message 2 of 3 (969 Views)

Re: IMC 5.1 in Topology View had wrong connection

Last time I try to up firmware v1910 to lastest firmware 5.20.1511

 

but it still make connection to another switch [real physical no connection]

 

in LLDP no this connection

 

please helps

Advisor
Posts: 17
Registered: ‎05-05-2010
Message 3 of 3 (941 Views)

Re: IMC 5.1 in Topology View had wrong connection

Hello,

 

I don't have a definitive solution or an explanation of such issue, but alternatively you can manually delete the wrong links using the "Link Management" tool :

 

Open a custom topology and then click on the button LinkMgmtButton.JPG to open the Link Management tool.

Then a new window open in which you can manage (and so delete) some link (you can filter on some devices, interfaces ... using the query button) :

LinkMgmt.JPG

 

After having deleted some links, they appear as "deleted" link in the tool (so that you can manually recover them) :

DeletedLinks.JPG

 

Hope this helps,

Fabien

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.