Re: rx8640 & parstatus -w -u Admin:Admin -h 172.16.0.74 (286 Views)
Reply
Regular Advisor
Ruslan R. Laishev
Posts: 154
Registered: ‎08-13-2003
Message 1 of 2 (332 Views)

rx8640 & parstatus -w -u Admin:Admin -h 172.16.0.74

Hello there!

 

I have some problem with the partition configuration on rx8640:

 

 

[mp-rx8640-1] MP:CM> sa

This command displays and allows modification of access parameters.

    T - Telnet access          : Enabled.
    H - SSH access             : Enabled.
    W - Web Console            : Enabled (SSL active).
    N - Network Diagnostics    : Disabled.
    D - DIAG Menu              : Disabled.
    I - IPMI Lan access        : Enabled.
    G - Windows Debug          : Disabled.
    S - SNMP                   : Disabled.

 

 

 

 


    Select access mode to change (q to quit) :

 

 

 

 


[mp-rx8640-1] MP:CM> so

    1. MP wide parameters
    2. User parameters
    3. IPMI password
    4. OS initiated firmware update permissions
    5. Regenerate the ssh server's public key
       Which do you wish to modify? ([1]/2/3/4/5) 3

       Enter new IPMI password (between 5 and 15 characters):
       Enter new IPMI password again (for verification):
       New IPMI password being saved (please wait)...
 
       IPMI password saved successfully.
 [mp-rx8640-1] MP:CM>

 

 

 

c:\Program Files (x86)\Hewlett-Packard\nParCommands>parstatus -w -u Admin:sharmanka135 -h 172.16.0.74
Error: Unable to connect to the nPar Provider on 172.16.0.74.
1. Verify that the HP nPar Provider (WMINParProvider on Windows) is installed and running on 172.16.0.74.
2. Verify that you are logged-in to the correct account (or have provided the correct username & password) to access the provider on
 172.16.0.74.
3. Verify that you have copied the server's SSL certificate from 172.16.0.74 to the trusted certificate store on the local machine (
see man/help/readme).
Cannot connect to 172.16.0.74:5989. Connection failed.

 

 

WireShark  show me that rx8640 answer with the RST on the first TCP's SYN.

 

 

Is there what I'm need to check ?

 

 

www.StarLet.SPb.RU
Please use plain text.
Trusted Contributor
John McL
Posts: 280
Registered: ‎02-24-2008
Message 2 of 2 (286 Views)

Re: rx8640 & parstatus -w -u Admin:Admin -h 172.16.0.74

Have you tried asking your hardware engineer?  This is the kind of thing that I would expect them to configure.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation