iPAQ hw6965 USB modem with GSM only (noGPRS) send SMS via hyper terminal (253 Views)
Reply
Occasional Visitor
Pravin_Bidkar
Posts: 1
Registered: ‎08-28-2011
Message 1 of 1 (253 Views)

iPAQ hw6965 USB modem with GSM only (noGPRS) send SMS via hyper terminal

Hi,

 

I have an HP iPAQ hw6965 with WM 5.0 I have a GSM connection to send receive SMS and mobile calls. All this works fine.

 

I want to be able to send SMS from a software program that I am writing.

For testing I have searched the net and found that this can be achieved by the AT+ commands. So I have a WinXP SP3, hyperterminal, iPAQ connected via the USB cradle, the usb modem in the mobile->start->program->modemLink is Active. I cannot change the "Access Point Name". I can only select it and it has only one option which seems to be an GPRS APN.

COM20 is what the USB modem is connected on so I use the com20 in Hyperterminal to connect to the mobile.

AT command seems to work as it returns OK ATI 1 to 5 also seem to work.

But non of the SMS releated commands work always return an ERROR or hang.

 

I have used a NOKIA 6630 in the similar way and I could send an SMS with AT+CMGS="+....

 

Any pointers or help to use the HP iPAQ to send/recv SMS from hyper terminal is appreciated.

 

Regards,

Pravin Bidkar

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.