routing tables (166 Views)
Reply
Occasional Contributor
marvin furuya_1
Posts: 2
Registered: ‎03-26-2003
Message 1 of 4 (166 Views)

routing tables

I need to add a ip, submask to the routing table on a HP A500 system running mpe/ix 7.5. Is this possible and how do I do it.

thanks, Marvin
Please use plain text.
Valued Contributor
Glenn A. Mitchell
Posts: 73
Registered: ‎10-20-1996
Message 2 of 4 (166 Views)

Re: routing tables

I'm not sure of the details, but you need to run NMMAINT.PUB.SYS while logged on as MANAGER.SYS (or someone with NM capability). Explore the various F-keys and you should be able to locate a panel to make the change. Validate and save any changes. You'll need to update the network (NSCONTROL or NETCONTROL command or both, I can never remember, with the UPDATE option).

Hope this helps.

Glenn
Please use plain text.
Advisor
Wim Korten
Posts: 31
Registered: ‎04-16-2003
Message 3 of 4 (166 Views)

Re: routing tables

Hi Marvin,

I think you need to modify the 'Neighbor Gateway Reachable Networks' via NMMAINT.

Checkout the following link:
http://docs.hp.com/en/36922-90040/ch06s11.html

Goodluck,
Wim
Limited by Technology
Please use plain text.
Trusted Contributor
Fred Metcalf
Posts: 233
Registered: ‎12-02-1996
Message 4 of 4 (166 Views)

Re: routing tables

The correct utility is NMMGR
Go to NS Configuration, then Guided Configuration, Config Network, Neighbor Gateways, etc.
Save and validate changes.
Then NETCONTROL command with the UPDATE option
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation