Re: routing tables (237 Views)
Occasional Contributor
marvin furuya_1
Posts: 2
Registered: ‎03-26-2003
Message 1 of 4 (237 Views)

routing tables

I need to add a ip, submask to the routing table on a HP A500 system running mpe/ix 7.5. Is this possible and how do I do it.

thanks, Marvin
Valued Contributor
Glenn A. Mitchell
Posts: 73
Registered: ‎10-20-1996
Message 2 of 4 (237 Views)

Re: routing tables

I'm not sure of the details, but you need to run NMMAINT.PUB.SYS while logged on as MANAGER.SYS (or someone with NM capability). Explore the various F-keys and you should be able to locate a panel to make the change. Validate and save any changes. You'll need to update the network (NSCONTROL or NETCONTROL command or both, I can never remember, with the UPDATE option).

Hope this helps.

Wim Korten
Posts: 31
Registered: ‎04-16-2003
Message 3 of 4 (237 Views)

Re: routing tables

Hi Marvin,

I think you need to modify the 'Neighbor Gateway Reachable Networks' via NMMAINT.

Checkout the following link:

Limited by Technology
Trusted Contributor
Fred Metcalf
Posts: 233
Registered: ‎12-02-1996
Message 4 of 4 (237 Views)

Re: routing tables

The correct utility is NMMGR
Go to NS Configuration, then Guided Configuration, Config Network, Neighbor Gateways, etc.
Save and validate changes.
Then NETCONTROL command with the UPDATE option
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.