08-04-2008 09:40 PM
The first incident was for the bottom unit in the left cabinet. The system was down hard and while examining hardware components we found that bus converter had no lights. We cycled the power switch for that individual unit and it came back to an active state, i.e. lights, fans. Then the system reboot and everything was fine.
The second incident matched the first in the system being down hard. We checked on the lower left bus converter. He then noticed the bus converter in the bottom of the right cabinet showed no lights. He also noted that the power button was still in the on position. He cycled the power and as with the first incident, the unit came back to an available state, the reboot was successful. There have been no further issues since that point. Any thoughts on what might cause the bus converters to loose power?
08-05-2008 02:05 AM
I move this thread to the "Servers, e3000" section.
Please provide more details on the system configuration, i-e, model of e3000 servers, bus converters.
08-05-2008 03:06 AM
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!