HP-UX OS Upgrade (c/ansi) (98 Views)
Reply
Advisor
Marvin L. Diaz
Posts: 25
Registered: ‎07-01-2007
Message 1 of 7 (98 Views)

HP-UX OS Upgrade (c/ansi)

Hi Guys,

I have to upgrade the server from HP-UX 11.0 to HP-UX 11.11.

I have a c/ansi installed on my current machine, do i need to reinstall the c/ansi after upgrading it to new OS HP-UX 11.11?

Do I need to buy a new license?

cheers,
Marv's
Respected Contributor
D Block 2
Posts: 569
Registered: ‎10-05-1999
Message 2 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)

h'mm so u have c/ansi C ?

you might want to check w/ HP Help Desk on this one, but generally once you purchase a valid license it should also be supported on the next release of the OS. Though, sometimes the license structure will change base on number of cpu's.. like Oracle or the hardware. Maybe might cost abit more..

check out the site: http://www.hp.com/go/c

and try to send an email to the perspective email using the above link.

Also, note that the Compiler of course will be different, or at least the version. Hint: test out all our Builds after the upgrade, you might find the Warnings and possible re-coding issues. Best, to consult the Porting Guide on this one.

The run-time libraries should be present for both: 11.0 and 11i on the new system. This you should try to understand what the issues might be related to performance regarding mix-mode matching of 11.0 and 11i libraries.

Golf is a Good Walk Spoiled, Mark Twain.
Frequent Advisor
Marcin O.
Posts: 40
Registered: ‎04-05-2005
Message 3 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)

Hi
I asked my friend in HP and he said that shouldn't be any problem with compiler and license after system update.
If you want direct response from HP you could always make case to ask in itrc even without contract.
Regards
Marcin
Acclaimed Contributor
Dennis Handly
Posts: 25,054
Registered: ‎03-06-2006
Message 4 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)

>I asked my friend in HP and he said that shouldn't be any problem with compiler and license after system update.

If you have a support contract for C, you can just get the latest version.

Possible problems I see with the upgrade. If you decide to listen to everyone here, you'll cold install and then there is a chance you don't have the original application CD, or forgot the codeword. And if you remembered all of that, there is a chance it won't install unless you use -x allow_incompatible=true, which won't work very well if you happen to have the CD for 11.23 or later.
Valued Contributor
Joelmel Roche
Posts: 157
Registered: ‎08-12-2004
Message 5 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)

Check the latest version for 11.11 bro..
Exalted Contributor
Steven E. Protter
Posts: 33,806
Registered: ‎08-15-2002
Message 6 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)

Shalom Marvin,

If you have a software support agreement you don't need another license to Ansi/C

upgrade-ux is a bad way to upgrade, it causes problems and has proven less than reliable.

Do a cold install, make sure your software contract is up to date and order the application dvd'd along with the OS DVD's

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Honored Contributor
whiteknight
Posts: 1,501
Registered: ‎11-22-1999
Message 7 of 7 (98 Views)

Re: HP-UX OS Upgrade (c/ansi)


Hi Marvin,

You need to get C/Ansi C for 11.11 software
http://h21007.www2.hp.com/portal/site/dspp/PAGE.template/page.document?ciid=4b080f1bace021100f1bace0...

if you have a valid support contract
You can obtain from SUM (Software update manager from ITRC)
http://www2.itrc.hp.com/service/sum/home.do

WK
please assign points
Problem never ends, you must know how to fix it
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.