Re: Version 11 SMI-S and SCVMM 2012 R2 (1218 Views)
Reply
Occasional Contributor
Posts: 6
Registered: ‎01-20-2014
Message 1 of 14 (1,362 Views)

Version 11 SMI-S and SCVMM 2012 R2

Has anyone been able to get SCVMM 2012 R2 to talk to a version 11 cluster over SMI-S?  Mine will connect and display the cluster name, but it shows 0 GB for the size and no storage pools.  Support is cluseless on getting this feature to work.

Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 2 of 14 (1,338 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

++I see the same thing. guess that is what they consider SMI-S support
HP Pro
Posts: 55
Registered: ‎01-31-2012
Message 3 of 14 (1,316 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

Well, it is working with SCVMM 2012 SP1(which is also the only mentioned SCVMM version in the 11.0 release notes). SCVMM 2012 R2 is not yet supported as far as I know.

Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 4 of 14 (1,298 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

isn't the point of SMI-S that its a UNIVERSAL standard?  not working in R2 should only happen if it isn't actually done to the standard like when people used to code to the IE3 html code instead of the real html and then it wouldn't always work in other browsers because they followed the spec.

Frequent Advisor
Posts: 87
Registered: ‎02-02-2007
Message 5 of 14 (1,271 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

We opened a case and get an answer from HP engineering that SMS-S in CMC v11.0 is only supported with SCVMM 2012 (SP1) and not suppoerted with SCVMM 2012 R2. support for SCVMM 2012 R2 will be added in the next release later this year.

Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 6 of 14 (1,265 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

http://en.wikipedia.org/wiki/Storage_Management_Initiative_%E2%80%93_Specification 

 

so basically they are saying they don't really do SMI-S, they just made a port for SCVMM to work.  Its like saying "our webpage works for IE8, but it won't work in IE9+/chrome/firefox/ect.. . because we didn't follow the standard when we programmed it.

Advisor
Posts: 15
Registered: ‎12-13-2005
Message 7 of 14 (1,226 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

How did you connect with VMM to Lefthand?

 

Is there some HP How to?

Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 8 of 14 (1,222 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

for VMM 2012r2 there is no point right now, but if you go to the fabric tab, you can add a "SAN and NAS devices discovered and managed by a SMI-S provider"  just add an SMIS- CIMXML protocol provider and use the cluster VIP for the IP and setup a run as account to match an account on the SAN and it will "work".  Right now all it does is say "oh hey I've connected and the name of your SAN is XXXX, but I don't see anything more."

Highlighted
Advisor
Posts: 15
Registered: ‎12-13-2005
Message 9 of 14 (1,218 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

Thank you for the information.

 

I also opend a case with HP and now have connection tot the LeftHand Clusters.

 

I see all the information and running VMM 2012 R2 CU1.

 

Occasional Visitor
Posts: 1
Registered: ‎08-21-2014
Message 10 of 14 (919 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

[ Edited ]

It has been a couple of months now since the last post. I also have this issue with HP Lefthand OS 11.5 en SCVMM 2012 R2 CU3.

 

I am able to connect to the storage and i receive the managment group name but no lun's, TB's or Manufacture, models or Pools.

 

Any news?

Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 11 of 14 (914 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

Thats a bummer.

 

Reading the update notes for 11.5 it sounds like it should be fixed.  I was going to wait another week before upgrading from 11 to 11.5 so I can't give you any firsthand experiance.

 

Did you start from scratch adding the clusters to SCVMM or were they already in there from when the cluster(s) were at v11?

Regular Advisor
Posts: 106
Registered: ‎05-14-2012
Message 12 of 14 (871 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

Yeah I can confirm the same thing with ours upgraded to 11.5

This 'upgrade'does not appear to have done anything new (again)

Regards.

David Tocker
Honored Contributor
Posts: 860
Registered: ‎07-20-2011
Message 13 of 14 (866 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

yup :-/  

 

I predict v12's major feature will be a "UI enhancement and overhaul"... aka "we are changing the color of background of the buttons and menu bar from grey to blue"

 

Its pretty sad, but if you look at the v11 and the v11.5 feature list it looks 99% identical.

Advisor
Posts: 15
Registered: ‎12-13-2005
Message 14 of 14 (257 Views)

Re: Version 11 SMI-S and SCVMM 2012 R2

Yesterday upgraded to version 12.0 and now SMI-S is working at last.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.