Removing P4500 ISCSI nodes from Management Group? (206 Views)
Occasional Contributor
Posts: 12
Registered: ‎01-18-2010
Message 1 of 2 (206 Views)
Accepted Solution

Removing P4500 ISCSI nodes from Management Group?

[ Edited ]

Hey all


I am being very cautious, so this may be a silly question.


I have 20*P4500 ISCSI nodes, 14 of which are in a Network Raid 10 production cluster and providing storage.  This cluster WAS 20 nodes, but I striped 6 of them out months ago.


I have not however removed them from the Management group, yet.


I am about to do so.  Having already striped them out, is there anything ELSE I need to do before removing them from the Management Group?


I know this sounds silly, because I have powered mamy of these 6 of at various times without issue, but I'm not a constant manager of the SAN, so am being ultra cautious.




P.S. This thread has been moved from Storage Area Networks (SAN) (Small and Medium Business) to HP StoreVirtual Storage / LeftHand. -HP Forum Moderator

Honored Contributor
Posts: 869
Registered: ‎07-20-2011
Message 2 of 2 (190 Views)

Re: Removing P4500 ISCSI nodes from Management Group?

just make sure you aren't running managers on them and that you have the correct number of managers running before you remove from the mgt. group.  if they are out of the cluster and not running a manager they won[t cause a problem.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.