HP StoreVirtual P4530 UPS configuration (578 Views)
Reply
Occasional Visitor
Divecomuk
Posts: 1
Registered: ‎02-21-2013
Message 1 of 3 (578 Views)

HP StoreVirtual P4530 UPS configuration

Is it possible to configure a HP StoreVirtual P4530 to be gracefully shutdown when connected to a UPS in the event of

a power failure?

Honored Contributor
oikjn
Posts: 793
Registered: ‎07-20-2011
Message 2 of 3 (559 Views)

Re: HP StoreVirtual P4530 UPS configuration

as long as you can run scripts you can use the CLI.

Regular Advisor
Sbrown
Posts: 135
Registered: ‎06-25-2013
Message 3 of 3 (535 Views)

Re: HP StoreVirtual P4530 UPS configuration

It would be logical for SMB/SME to include a script to safely shutdown (and power up) the units!

 

APCUPSD is free guys! Works great on every o/s!

 

It would be logical for the last man standing (lefthand) to shutdown the hypervisor and guests rather than the other way around due to timing. 

 

AKA run APCUPSD on the lefthand units. 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.