HP 4300 G2 Event codes:E00030100 (2486 Views)
Reply
Occasional Contributor
Posts: 2
Registered: ‎06-01-2010
Message 1 of 6 (2,486 Views)

HP 4300 G2 Event codes:E00030100

Hi I am having errors on my system displaying E00000300 EID_MG_CONNECTION_STATUS_DOWN, I am running a FOM installed with Vmware2, this system is also running Backup Exec. Seems to be more of an when the backup is running, could the error be relating to a I/O delay effecting the system that is running in Vmware.

I have tried to find event codes but did not find any in the documentation. Please any help would be appreciated.
Occasional Advisor
Posts: 12
Registered: ‎03-08-2011
Message 2 of 6 (2,486 Views)

Re: HP 4300 G2 Event codes:E00030100

As a side note, the Resolution links that appear in the alert emails point to an invalid location. For example:

http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=US&pc=0&sc=2&cf=1&cm...
Occasional Visitor
Posts: 2
Registered: ‎09-12-2012
Message 3 of 6 (1,945 Views)

Re: HP 4300 G2 Event codes:E00030100

Still no answear to this issue?

Occasional Visitor
Posts: 1
Registered: ‎03-05-2013
Message 4 of 6 (1,717 Views)

Re: HP 4300 G2 Event codes:E00030100

I have either the same issue (but on an HP P4000) or very similar one and I'm wondering if anyone has some additional information. This error or alert is being triggered daily and I still can't figure it out. In some cases two to three times a day even: 

 

Subject: Quorum communication status for manager 'x.x.x.x' in management group 'XXXX' is 'Down'. WARNING (E00000300)


Event : E00000300 EID_MG_CONNECTION_STATUS_DOWN
Severity : Warning
Component : SAN/iQ
Object Type : Management Group
Object Name : XXXX
Management Group : XXXX
Cluster : XXXX-XX
IP/Hostname : XXXX.domain.com
Date and Time : 03/01/2013 07:16:51 GMT
User : System
Resolution : http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=US&pc=0&sc=2&cf=1&cm...
Message : The quorum communication status for manager 'x.x.x.x' in management group 'XXXX' is 'Down'. Manager 'x.x.x.x' cannot communicate with managers 'XXXX, XXXX'.

 

The link above; as you will find out; leads to a page that cannot be found. Any information is very much appreciated. 

 

Thank you

Occasional Visitor
Posts: 2
Registered: ‎09-12-2012
Message 5 of 6 (1,715 Views)

Re: HP 4300 G2 Event codes:E00030100

Maybe it is due to the high I/O when backing up. I also use Symantec BE.

Occasional Visitor
Posts: 1
Registered: ‎03-17-2013
Message 6 of 6 (1,694 Views)

Re: HP 4300 G2 Event codes:E00030100

same here during Symantec BE Backups of VM's (Hyper-V)

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.