Re: Clone volume possible without SmartClone? (760 Views)
Occasional Visitor
Posts: 1
Registered: ‎10-17-2012
Message 1 of 3 (786 Views)

Clone volume possible without SmartClone?



I'm new to HP Lefthand. In the past years i've used a Dell EqualLogic with a Citrix Xenserver setup.


Now I have a HP P4500 SAN with some servers and a VMware setup.


In my setup I want every VM is located on it's own volume on the SAN, so I can manage snapshot settings per volume. I've installed the first VM (Windows 2012) as a default VM, so now I want to clone the volume in the CMC of HP, and then add it as a new VM in VMware. After that rename it, change login/ip settings and install soms specific software on it.


My question is: how to clone a volume in the HP CMC? I've tried SmartClone, which works fine, but then I have a shared snapshot between the original volume and the clone volume and i'm not feeling fine with it (performance issues?). I need 8 copies of the original VM....


In my good old EqualLogic I can push one button to clone a volume, even it was possible to create a new volume from a snapshot.


Can someone help me with it? Or is it ok to simply use SmartClone and don't look for the shared snapshot which I can't delete (because "it's used by multiple volumes")?




Danny from Holland



Occasional Advisor
Posts: 7
Registered: ‎10-27-2011
Message 2 of 3 (760 Views)

Re: Clone volume possible without SmartClone?

I use remote copy to same MG and then make it a primary volume.

Posts: 17
Registered: ‎11-30-2012
Message 3 of 3 (440 Views)

Re: Clone volume possible without SmartClone?

I've blogged about this here-


I've detailed all the steps involved to duplicate a primary volume as another primary volume, hopefully you'll find it useful.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.