Re: ALB Bond for p4300G2 (340 Views)
Reply
Occasional Advisor
jasp2k
Posts: 21
Registered: ‎09-18-2012
Message 1 of 3 (372 Views)
Accepted Solution

ALB Bond for p4300G2

newbie at installing a p4300. I would like to setup a bond for the 2x10Gb nics. Do i need to configure a static ip for both nics and then create a bond via CMC or configuring 1 nic w. static is all thats required then configuring bond via cmc

Honored Contributor
Bart_Heungens
Posts: 687
Registered: ‎10-26-2005
Message 2 of 3 (357 Views)

Re: ALB Bond for p4300G2

Hi,

 

1 NIC is OK to be configured , the other can be on DHCP or so, not that important...

When creating the bond, it will take the fixed IP address across the 2 NICs...

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
My blog: http://blog.bitcon.be
Occasional Advisor
jasp2k
Posts: 21
Registered: ‎09-18-2012
Message 3 of 3 (340 Views)

Re: ALB Bond for p4300G2

Thanks

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.