view all LUNS in eva3000 (859 Views)
Reply
Occasional Visitor
xorras
Posts: 2
Registered: ‎08-02-2013
Message 1 of 10 (859 Views)
Accepted Solution

view all LUNS in eva3000

[ Edited ]

Hello everyone.
 
Anyone know if there is a program or a command option in the view to see all the LUNS and ability on a EVA3000??

 

 
P.S. This thread has been moved from Storage > General to HP Storage System Scripting Utility (SSSU).
-HP Forum Moderator
Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 2 of 10 (856 Views)

Re: view all LUNS in eva3000

Open command view -> virtual disks and you will see all LUNs (vdisks) inside the EVA.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
xorras
Posts: 2
Registered: ‎08-02-2013
Message 3 of 10 (853 Views)

Re: view all LUNS in eva3000

but there is a way to have a list of all luns with their abilities

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 4 of 10 (850 Views)

Re: view all LUNS in eva3000

I guess the SSSU command "ls vdisk" or "ls lun" will give you the needed information.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
kuldeep_s
Posts: 3
Registered: ‎11-14-2013
Message 5 of 10 (764 Views)

HP EVA 4000 discovery not working with command view 6.2

Hi Team,

 

I have installed comamnd view Version: 6.0.2.37 on window 2008 server. This server has one emulax 8 Gbps fibre adapter conntected throught mcdata switch. One port of each controller is zoned to this server. I am not able to discover HP EVA san storage. Please help me get the any diagnostcis doc for troubleshooting it.

 

Kuldeep

 

Kuldeep Singh
Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 6 of 10 (761 Views)

Re: HP EVA 4000 discovery not working with command view 6.2

Your command view is most likely much too old.

 

Try Command View 10.3 from software hp.com


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
kuldeep_s
Posts: 3
Registered: ‎11-14-2013
Message 7 of 10 (755 Views)

Re: HP EVA 4000 discovery not working with command view 6.2

Thanks for reply. Actually we are using this box only for backup and does,t want to invest much in it. Please suggest if there is some thing I can check.

 

Thanks

Kuldeep Singh
Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 8 of 10 (751 Views)

Re: HP EVA 4000 discovery not working with command view 6.2

If the XCS version of the array is too new for your command view version, CV will not find the array.
This is the situation you have.
Try CV10.3, it is free to trial.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
kuldeep_s
Posts: 3
Registered: ‎11-14-2013
Message 9 of 10 (747 Views)

Re: HP EVA 4000 discovery not working with command view 6.2

Thanks. I will try it and will let you know the status, But It is working on another 2003 server which we have plan to shutdown.

Kuldeep Singh
Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 10 of 10 (741 Views)

Re: HP EVA 4000 discovery not working with command view 6.2

So please get the XCS version from the other CV session and tell.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.