EVA Configuration backup (1733 Views)
Occasional Contributor
Posts: 1
Registered: ‎08-30-2011
Message 1 of 2 (1,733 Views)

EVA Configuration backup

I i tried to take the backup of EVA using SSSU by typing the command "CAPTURE CONFIGURATION'" and redirecting to a file name but while i am opening this file i cant see any configuration only i can see the below line... is the configuration is saving to some other location rather than the default folder


CAPTURE CONFIGURATION may take awhile. Do not modify configuration
until command is complete.



CAPTURE CONFIGURATION Step1A complete and successful


CAPTURE CONFIGURATION Step1B complete and successful


CAPTURE CONFIGURATION Step1C complete and successful


CAPTURE CONFIGURATION Step2 complete and successful


CAPTURE CONFIGURATION Step3 complete and successful



Please give suggestions

HP Pro
Posts: 312
Registered: ‎11-25-2010
Message 2 of 2 (1,725 Views)

Re: EVA Configuration backup



Please check the correct syntax of the command.


The scripts output to the console unless you specify a file name. The file name is appended with
_StepXX. XX is the restore step name, which is 1A, 1B, 1C, 2, or 3. For example, if you specify
CAPTURE CONFIGURATION newyear.txt, SSSU creates the files newyear_Step1A.txt,newyear_Step1B.txt, newyear_Step1C.txt, newyear_Step2.txt, and



Details in reference guide at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02493404/c02493404.pdf


If this post was useful , click the Kudos Star on the left side to say Thanks!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.