09-14-2005 06:26 PM - last edited 4 weeks ago by Lisa198503
What is the default SSSU login for USERNAME and PASSWORD.
P.S. This thread has been moved from Storage Area Networks (SAN) (Enterprise) to HP Storage System Scripting Utility (SSSU). -HP Forum Moderator
Solved! Go to Solution.
09-14-2005 07:02 PM
> cd "\Program Files\Hewlett-Packard\SANworks\Element Manager for StorageWorks HSV\Bin"
> ElmSetup -pA:thepassword -f
Next, restart the "HP Command View EVA" service.
If that does not help, reboot the management server.
09-15-2005 06:34 PM
it's the same as password set directly on EVA controler. So it's possible to change it there, in Command View and use it in SSSU.
May be the
ElmSetup -pA:thepassword -f
does it for both, the controler and CV. I'm not familiar with this.
09-15-2005 06:50 PM
09-16-2005 06:37 AM
09-17-2005 04:23 AM
This is a passage from SSSU manual
Use the SELECT MANAGER command to direct the command prompt to a
selected command view eva or management appliance. All configuration
commands run on the selected command view eva or management appliance and
affect its storage system configuration. The
appliance name, or an IP address.
The following switches are available with the SELECT MANAGER command:
SSSU Command Reference
These switches are described in the following paragraphs.
Password associated with the username that you use to access the command view
Username that you use to access the command view eva.
The following switches are required with the SELECT MANAGER command:
SELECT MANAGER north_campus USERNAME= XXX PASSWORD= XXXX
This example selects the manager north_campus. The username and password for the
manager are validated in the background on every command.