Re: Incident is Resolved but throwing process panel error (1268 Views)
Reply
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 1 of 22 (1,363 Views)

Incident is Resolved but throwing process panel error

Hi,

 

When incident is "Resolved" and clicked on Save its showing error like"Process panel calc.validations in RAD format.cval encountered error in line 8 (format.cval,calc.validations)" ,Please anybody help me in this , i am struggling so much

 

Thanks

Basavaraj Dani

Established Member
Posts: 3
Registered: ‎10-08-2013
Message 2 of 22 (1,355 Views)

Re: Incident is Resolved but throwing process panel error

Hi ..,

Please check your Fc calculation 8th line ...

HP Expert
Posts: 258
Registered: ‎11-01-2011
Message 3 of 22 (1,334 Views)

Re: Incident is Resolved but throwing process panel error

Hello Basavaraj,

 

I noticed you created different threads at the same time about different issues.

 

Can you provide us more information about any changes you made on your system?

 

What version are you using? Was it working fine before?

 

You could also try reverting any changes to see if you notice any differences.

 

On this specific issue, as it was already mentioned please check line 8 looking for the problem there.

 

Regards,

Alex

HP Support
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 4 of 22 (1,330 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 

I am using SM 9.30,I am the new guy to this environment,before me another person working on it,

 

in 8th line some calulation is there

Honored Contributor
Posts: 3,930
Registered: ‎07-13-2007
Message 5 of 22 (1,323 Views)

Re: Incident is Resolved but throwing process panel error

Actualy, the error appears to reference the 8th validation in format control, not the 8th calculation. Note that it could be referencing either the Master FC record (same as tablename, normally) OR the format-specific FC (same as form name). 

----------------------------------------------------
Kudos - what, where, how, and why
Want Good Answers? Ask Good Questions...
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 6 of 22 (1,313 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 

In FC calulation condition is critical.user in $file=nullsub(critical.user in $file, false) for Update and initial are true

 


and in Validation part false is there,why its throwing error

 

Trusted Contributor
Posts: 331
Registered: ‎01-25-2011
Message 7 of 22 (1,311 Views)

Re: Incident is Resolved but throwing process panel error

Hi Basavaraj,

 

have you done any changes or written new condition in FC? if so just try to revoke those changes then it should work.

 

Issue is clearly with the condition which you have written in FC. This may not be the exact line no in FC.

 

Assign Kudos this as helped you.

 

Regards,

Madhan

Advisor
Posts: 25
Registered: ‎02-04-2013
Message 8 of 22 (1,307 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 I didn't done any changes in the FC, i have attached FC screen shot file.once u check it

 

Trusted Contributor
Posts: 331
Registered: ‎01-25-2011
Message 9 of 22 (1,303 Views)

Re: Incident is Resolved but throwing process panel error

share the FC of Im.update.incident and probsummary unl file

Advisor
Posts: 25
Registered: ‎02-04-2013
Message 10 of 22 (1,292 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 

Please find the attachment

Trusted Contributor
Posts: 331
Registered: ‎01-25-2011
Message 11 of 22 (1,284 Views)

Re: Incident is Resolved but throwing process panel error

Hi Basavaraj,

 

I checked and could not find any error.

 

Follow the below steps to confirm if FC is culprit.

 

Rename im.update.incident & probsummary of FC then try to reproduce the issue, to my knowedge it should not give u any error, if there is no error then try to reproduce the issue keeping one of the FC active(restoring the FC name) this will help you to drill down to check which FC is causing the issue.

 

Regards,

Madhan

Honored Contributor
Posts: 4,456
Registered: ‎06-17-2010
Message 12 of 22 (1,279 Views)

Re: Incident is Resolved but throwing process panel error

Hi Basavaraj,

As John stated, check your 8th validation in master or form level FC.

hth,
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Highlighted
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 13 of 22 (1,268 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 

I renamed the Im.update.incidents & probsummary,the issue is same.

Trusted Contributor
Posts: 331
Registered: ‎01-25-2011
Message 14 of 22 (1,261 Views)

Re: Incident is Resolved but throwing process panel error

Hi Basavaraj,

 

Can you tell me the steps which was performed, the intention behind renaming it is making im.update.indicent and probsummary unavailable. there should not be any FC by im.update.indicent and probsummary.

Logout then reproduce, was this step performed?

because the error which you are getting is because of some error in FC.

 

Regards,

Madhan

Advisor
Posts: 25
Registered: ‎02-04-2013
Message 15 of 22 (1,248 Views)

Re: Incident is Resolved but throwing process panel error

I reanamed as im.update.inicdent as IM.update.incident.test and probsummary as probsummary.test


But i am not getting Process panel error.please tell what step i have to take next

 

Trusted Contributor
Posts: 331
Registered: ‎01-25-2011
Message 16 of 22 (1,246 Views)

Re: Incident is Resolved but throwing process panel error

Please assign Kudos if it helpful.

 

Check in FC now, there will be some condition which is causing this error

Advisor
Posts: 25
Registered: ‎02-04-2013
Message 17 of 22 (1,238 Views)

Re: Incident is Resolved but throwing process panel error

IN FC i am not getting what is the error exaclty,i already shared unl file ,once u can check it and tell me the next step reslove the issue

 

 

Honored Contributor
Posts: 4,456
Registered: ‎06-17-2010
Message 18 of 22 (1,232 Views)

Re: Incident is Resolved but throwing process panel error

Hi ,

We can not upload these unl as might disturb our environment too.
just paste snap shot shot of 8th validation from both your FC.

hth,
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 19 of 22 (1,221 Views)

Re: Incident is Resolved but throwing process panel error

HI,

please find the attachment,IN IM.update.incidnet validation 8th lineis there but in probsummary only few validation

 

 

Honored Contributor
Posts: 4,456
Registered: ‎06-17-2010
Message 20 of 22 (1,208 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

Why it is false in 'update' column ?
If false then error should not be there.
Post your query and calculation tab snap shot too of probsummary FC.
And exactly when do you got this error. while providing 'assignee.name' ?

hth,
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Advisor
Posts: 25
Registered: ‎02-04-2013
Message 21 of 22 (1,202 Views)

Re: Incident is Resolved but throwing process panel error

Hi,

 

exaclty this issue happening when the inicdent status change from "Pending Vendor" to "Pending for service provider"

please find the attachment and help me in this

Honored Contributor
Posts: 4,456
Registered: ‎06-17-2010
Message 22 of 22 (1,196 Views)

Re: Incident is Resolved but throwing process panel error

but initially you told when resolve and click on save.
Issue is there for validations please check and post all validation snap shot for both fc with full error message.

hth,
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.