Re: Hardware Support roadmap (526 Views)
Reply
Visitor
GrantStreet
Posts: 3
Registered: ‎12-09-2013
Message 1 of 16 (605 Views)
Accepted Solution

Hardware Support roadmap

What is the roadmap for supporting older hardware?

What hardware is currently supported?

Please use plain text.
Visitor
GrantStreet
Posts: 3
Registered: ‎12-09-2013
Message 2 of 16 (604 Views)

Re: Hardware Support roadmap

Are there any requirements on the chassis hardware version?

Please use plain text.
Frequent Advisor
Hazem Bahgat
Posts: 37
Registered: ‎06-23-2010
Message 3 of 16 (580 Views)

Re: Hardware Support roadmap

Greetings GrantStreet,

Mind you give me some more information about your request?

mind you give me brief information about your old HW and what road map you need to move to?

Best Regards and Appreciation,
Hazem Bahgat

Say thanks by clicking the "Kudos! Star" which is on the left.

Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 4 of 16 (566 Views)

Re: Hardware Support roadmap

Thank you for your inquiry GrantStreet.  However, we are unable to discuss roadmap information regrading unreleased versions or products on our Forums.  Please ask your HP Sales team to discuss that topic.

 

To your other question, we have no requirements for specific enclosure generations, other than HP OneView only supports the c7000 enclosure at this time.  For other hardware support information, please see the Release Notes and Support Matrix for the most current hardware support information.  You can find either of these docs on the HP OneView Enterprise Information Library section.

Please use plain text.
Neighborhood Moderator
Jeroen_Kleen
Posts: 118
Registered: ‎04-29-2003
Message 5 of 16 (564 Views)

Re: Hardware Support roadmap

hi GrantStreet, you can find the needed info on www.hp.com/go/OneView/docs or in detail on these 2 URLs on that page:
releasenotes: http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c03967136
supportmatrix: http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c03967138
CHeers, Jeroen
(I am an HP Employee and CI Ambassador)
http://www.hp.com/go/hpCloud
http//www.hp.com/go/CI
http://www.hp.com/go/OneView
Please use plain text.
Occasional Advisor
mt3dek
Posts: 9
Registered: ‎12-15-2013
Message 6 of 16 (543 Views)

Re: Hardware Support roadmap

Looking through the matrixes, is it safe to assume, since it is not listed, that HP Workstation Blades G6 models are NOT supported? Majority of my environment are G6 workstation blade models. WS460, WS490, BL490 all G6. All my chassis are c7000/c7000 G2 (14 in total)

 

Can you confirm? If I install OneView 1.0 in current environment it will work for my G8 blades, but the firmware management and update mechinism is supported and managed by Insight Management. Does the latest version of Insight Management support G6 infrastructure?

Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 7 of 16 (537 Views)

Re: Hardware Support roadmap

The HP OneView Support Matrix outlines the supported hardware.  As HP OneView supports only Gen8 and specific G7 blade servers, any legacy server will be unsupported.  They will appear in the Inventory, but assigning Server Profiles will not be possible.  HP OneView is designed to build upon the innovations in Gen8, while still supporting specific legacy G7 blade servers.

 

We would advise customers that require management of legacy HP ProLiant infrastructure to continue using the Insight Management suite.

Please use plain text.
Occasional Advisor
mt3dek
Posts: 9
Registered: ‎12-15-2013
Message 8 of 16 (534 Views)

Re: Hardware Support roadmap

OneView uses Insight correct? so would this require only 1 server or 2 different servers? I didnt see anything specific for VMWare 4 being support in 7.2 or 7.3. Is that not supported as well?

Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 9 of 16 (526 Views)

Re: Hardware Support roadmap

 

 

       OneView uses Insight correct?

 

No, HP OneView does not use the base Insight Control product.  The HP OneView license does entitle customers to the use of HP Insight Control Server Provisioning, which is an appliance-based server provisioning tool.

 

To your question regarding VMware 4 support, it is listed in the HP Insight Management Support Matrix v7.3, on Page 59.  The table is a bit weird IMO.  You can find other support related documentation on the Enterprise Information Library.

Please use plain text.
Occasional Advisor
mt3dek
Posts: 9
Registered: ‎12-15-2013
Message 10 of 16 (523 Views)

Re: Hardware Support roadmap

Thanks Chris,

 

With that being said, can Insight Mangement and OneView be loaded on the same VMWare server?

Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 11 of 16 (520 Views)

Re: Hardware Support roadmap

As you were inquiring about vSphere 4, no, as HP OneView only supports vSphere 5 or greater due to the VM hardware type.  If you plan on upgrading to a newer release of vSphere, then my comment could change.  As always, please read the Release Notes and Support Matrix for the product in question, as they are always kept up to date.  I provided a link to the Enterprise Information Library, which should be the first place you visit for that type of document.

Please use plain text.
Honored Contributor
Bart_Heungens
Posts: 647
Registered: ‎10-26-2005
Message 12 of 16 (511 Views)

Re: Hardware Support roadmap

Let it be clear that Oneview is an appliance based VM that can be installed through a VMware OVF file (and like Chris mentioned on VMware 5.x minimum), and that HP SIM and Insight Control needs to be installed on a Windows servers (Linux is also supported).

 

So as such it could be running on the same VMware servers. The tool set used however will be slightly different.

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
My blog: http://blog.bitcon.be
Please use plain text.
Occasional Advisor
mt3dek
Posts: 9
Registered: ‎12-15-2013
Message 13 of 16 (506 Views)

Re: Hardware Support roadmap

Thanks for the clarification, and OneView requires additional licensing and Insight Management does not correct?

Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 14 of 16 (504 Views)

Re: Hardware Support roadmap

Both HP OneView and HP Insight Control are completely seperate licensible products.  For licensing options, please refer to the QuickSpecs for each product:

 

Insight Control QuickSpecs

HP OneView QuickSpecs

Please use plain text.
Frequent Advisor
Brendan Murphy_5
Posts: 48
Registered: ‎02-14-2005
Message 15 of 16 (494 Views)

Re: Hardware Support roadmap

Looking through the OneView quickspecs, I see that only G7 & G8 blades are supported as well as G8 Proliant servers.... so maybe the "Server Provisioning" section under "Standard Features" should be modified to remove the line about support for G6 PXE-free deployment.

 

"PXE-free deployments leveraging HP Intelligent Provisioning for ProLiant Gen8 servers (and with additional support for ProLiant G7 and G6 servers)."

 

Regards,

Brendan

Please use plain text.
Neighborhood Moderator
Chris Lynch, HP
Posts: 37
Registered: ‎09-02-2006
Message 16 of 16 (491 Views)

Re: Hardware Support roadmap

Thank you for your reply Brendan.  Insight Control Server Provisionging has a different support matrix than HP OneView, and supports older genration of ProLiant servers.  Even though an HP OneView license entitles customers to use ICSP, they are seperate products. 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation