Self-studying StorageWorks ASE/MASE (945 Views)
Posts: 27
Registered: ‎07-25-2006
Message 1 of 2 (945 Views)
Accepted Solution

Self-studying StorageWorks ASE/MASE

Hi All,



I've got the 2008 MASE and have been told training for the latest version isn't an option at this stage (ASE/MASE).

 The only option I have now is to self-study, which a support person from ExpertONE said is possible.

I have a lot of material to read through from the HP website, but was wondering if there was anything else I should be looking at, or any advice?



Respected Contributor
Posts: 74
Registered: ‎01-03-2012
Message 2 of 2 (908 Views)

Re: Self-studying StorageWorks ASE/MASE

Hi CraigV,


There are quite a few options available to you!  Instructor Led Training is one option but there are some self-study options as well.


My recommendation is to start with the certification you want to achieve and then drill down from there.  You can find the list of certifications here:


Next step is to log into your MyExpertOne page to see what your personalized training and certification plan options are:  This page lets you create your own customized learning plan based on your job role and skill set.


Finally, make sure you check out the Exam Preparation Guides that are available for each one of the HP ExpertOne exams as they will let you know what is covered in the exam and will give you links to additional training and supporting material.  For example, here's the HP ATP - Storage Solutions V1 HP0-J73 Exam Prep Guide:


I hope this helps but don't hesitate to send me a note with any questions or concerns!




I am an HP Employee
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.