Re: Double Density blades - (933 Views)
Reply
Frequent Advisor
Dave Cast
Posts: 91
Registered: ‎02-22-2008
Message 1 of 6 (952 Views)

Double Density blades -

Can someone explain to me what a double density blade actually is in real world terms (not typical HP doc-speak) - ?

 

 

Is it a full height blade?  Taking the bottom AND the top bays? or is it something else entirely - HP docs are clear as mud....

 

 

 

Today is different and tomorrow the same.
Please use plain text.
Respected Contributor
Psychonaut
Posts: 210
Registered: ‎08-31-2011
Message 2 of 6 (946 Views)

Re: Double Density blades -

The BL220 series is basically a 1/2 height split into two servers. The networking for the 1st "server" runs on interconnect 1&2 and the 2nd "server" runs on interconnects 3 & 4. It scales out to 32 servers per chassis. The best use case is if you need a lot of processors.
Please use plain text.
Frequent Advisor
Dave Cast
Posts: 91
Registered: ‎02-22-2008
Message 3 of 6 (945 Views)

Re: Double Density blades -

Thanks for the response - so it's not a server (blade in this case) "partitioned" out as two entirely different servers w/ separate resoures and OS's ?

Today is different and tomorrow the same.
Please use plain text.
Respected Contributor
Psychonaut
Posts: 210
Registered: ‎08-31-2011
Message 4 of 6 (942 Views)

Re: Double Density blades -

It is a server "partitioned" out as two server with separate OS's and proc's. I'm not sure how the hard drives work - one per server? I have heard this is one of the lines that HP is thinking about discontinuing. Something to keep in mind as you research them.
Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,187
Registered: ‎10-02-2001
Message 5 of 6 (938 Views)

Re: Double Density blades -

Never seen such thing before, but according to the documentation there are 2 "small" independent servers in a half hight blade chassis.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Honored Contributor
Bart_Heungens
Posts: 674
Registered: ‎10-26-2005
Message 6 of 6 (933 Views)

Re: Double Density blades -

Hi,

 

These are effectively 2 independent servers in 1 half height blade case.

 

Some specs - per server (so 2 times all this in 1 half height case):

- up to 2 Xeon 55xx processors

- 6 DIMM sockets DDR3 so max 96GB

- 1 non hotplug SFF SATA or SSD drive

- 1 dual port NIC NC362i

- 1 I/O expansion mezzanine slot

- ILO2

 

Is indeed used in environments where alot of CPU's and memory is necessary... For instance HPC and Linux clusters...

 

If you send me a mail I can send some pictures from the inside and the front...

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
My blog: http://blog.bitcon.be
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation