08-27-2013 08:40 PM
Having problem with OA2 not able to get OA Tray firmware with the following error logs.
Aug 28 09:51:52 Redundancy: Onboard Administrator is switching to Active mode
Aug 28 09:52:02 OA: Tray Update: Can't get TRAY PS microcode version
Aug 28 09:52:03 OA: LCD Status is: OK.
Aug 28 09:52:03 OA: Enclosure Status changed from OK to Degraded. (Diagnostics)
Aug 28 09:52:03 OA: PS Subsystem Overload - FAILED. Allocated Power: 500W DC, Present Power: 0W AC.
Aug 28 09:52:03 OA: PS Subsystem N + N Redundancy - FAILED. Allocated Power: 500W DC, Present Power: 0W AC.
Aug 28 09:52:03 OA: Enclosure Status changed from Degraded to Failed. (Power Subsystem)
Aug 28 09:52:04 Enclosure-Link: Service started
Aug 28 09:52:07 Redundancy: Onboard Administrator has now completed the Standby to Active transition
Aug 28 09:53:07 OA: Enclosure Dynamic Power Cap: Unable to determine device tray firmware version.
With OA1 is active, no problem.
OA firmware is 3.60.
OA Tray firmware is 1.7 shown when OA1 is active.
Any workaround for this problem?
Solved! Go to Solution.
08-27-2013 09:38 PM
Remove the OA2 and reseat, this will reinitialize OA and the active OA will try to update the firmware. If this does not help, Contact HP support.
Was the post useful? Say thanks by clicking the white KUDOS Star!
For HP Guided Troubleshooting -- http://www.hp.com/support/hpgt