C7000 DC -48V (118 Views)
Reply
Occasional Visitor
Posts: 2
Registered: ‎02-04-2008
Message 1 of 4 (118 Views)
Accepted Solution

C7000 DC -48V

I have few questions around the -DC 48V power supply of a C7000; thanks for your help.

Where can i found a datasheet on the Kevlar product using anti-sismic rack and DC -48 volts power supply?
Is there a simple -48V DC option for the ISS product?
Another way to say that: Is it possible to order
AH332A #0D1 -48vDC Power Supply
AH331A #0D1 DC Input Module
on a regular C7000 enclosure
(not AH345A #0D1 C7000 Enclosure)?
Honored Contributor
Posts: 562
Registered: ‎07-18-2007
Message 2 of 4 (118 Views)

Re: C7000 DC -48V

Another way to say that: Is it possible to order
AH332A #0D1 -48vDC Power Supply
AH331A #0D1 DC Input Module
on a regular C7000 enclosure
(not AH345A #0D1 C7000 Enclosure)?

You can't use the DC power supplies on regular C7000.

The Back connectors will be different for DC power supplies and regular C7000.
Occasional Visitor
Posts: 1
Registered: ‎02-05-2008
Message 3 of 4 (118 Views)

Re: C7000 DC -48V

The HP BladeSystem Carrier Grade Platform is described at:

http://www.hp.com/products1/servers/carrier_grade/products/bl460c-cg/index.html

A datasheet is available at the "Information Library" link.
Occasional Visitor
Posts: 2
Registered: ‎02-04-2008
Message 4 of 4 (118 Views)

Re: C7000 DC -48V

I got this information from another source:

Yes on Feb 11th when we do the ISS launch you will be able to order

AH332A #0D1 -48vDC Power Supply
AH331A #0D1 DC Input Module

on a regular C7000 enclosure

We will on Feb 11th support DC input on a standard c7000.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.