BL460c iLo 4 Firmware Issue (430 Views)
Reply
Occasional Contributor
GrumpyBum
Posts: 5
Registered: ‎06-15-2010
Message 1 of 2 (430 Views)

BL460c iLo 4 Firmware Issue

Hi All,

 

I am having an issue with an iLo firmware update on a BL460c GEN8 / iLo 4.

Currently I have updated 6 of 7 servers from iLo firmware 1.10 to 1.30 but 1 has hung.

 

For the last 2 days this has said '1% Flashing Image...' and will not change.

 

Has anyone else had this issue and how did you resolve.

I can still use the server and browse the iLo but I need this issue resolved.

 

 

Thanks in advance,

Please use plain text.
Occasional Contributor
GrumpyBum
Posts: 5
Registered: ‎06-15-2010
Message 2 of 2 (396 Views)

Re: BL460c iLo 4 Firmware Issue

This has now been resloved,

 

Although other blades took this upgrade fine I have approached this box differently.

Firstly I have pulled from the Chassy to reset all power and this stopped the iLo 4 update.

 

To get this updated I went to iLo 4 ver. 1.22 using the scexe from HP.

Then I returned once this was completed and applied the ver. 1.30 update via the iLo 4 interface again.

All went smoothly without any issues.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation