BL460 G8 second HBA mezzanine card (470 Views)
Reply
Trusted Contributor
Juan M Leon
Posts: 285
Registered: ‎01-14-2003
Message 1 of 2 (470 Views)
Accepted Solution

BL460 G8 second HBA mezzanine card

Hello all,  I need help with 3 BL460 G8 blades on a HPC7000, we recently installed a second FC mezznine card for all the 3 blades. everything seems to be ok except that the cards are pointing to Bay 5 and 6. We dont have anything on Bay 6 and on Bay 5 we have a fiber switch.  Is there a way to change the port mapping to use bay 3 and bay 4 instead of bay 5 and bay 6

 

Please let me know if this is possible and how can I make the changes.

 

 

Attached is a port-map screen print for one of the blades.

thank you

juan

 

 

 

Acclaimed Contributor
Torsten.
Posts: 23,367
Registered: ‎10-02-2001
Message 2 of 2 (451 Views)

Re: BL460 G8 second HBA mezzanine card

The connections are hard wired, no way to change.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.